ASTM A216 WCA铸钢低倍组织及微观组织实验研究
Study on Macrostructure and Microstructure of ASTM A216 WCA Cast Steel
苏 斌1, 韩志强1, 赵永让2, 沈丙振2, 柳百成1
点击:3876次 下载:0次
作者单位:(1. 清华大学 机械工程系 先进成形制造教育部重点实验室, 北京 100084; 2. 中信重工机械股份有限公司, 河南 洛阳 471039)
中文关键字:ASTM A216 WCA; 铸钢; 冷却速率; 微观组织; 金相腐蚀; 柱状晶向等轴晶转变
英文关键字:ASTM A216 WCA; cast steel; cooling rate; microstructure; metallographic corrosion; columnar-to-equiaxed transition
中文摘要:针对ASTM A216 WCA铸钢材料,采用金相腐蚀和低倍侵蚀法获得了不同冷却速率下材料的金相图及低倍腐蚀图,并且进行了分析。结果表明,随冷却速率的增大,先共析铁素体的晶粒尺寸减小,体积分数增大,针状铁素体增多;重力作用对实际铸钢件在凝固过程中柱状晶向等轴晶的转变(CET)有重要影响。
英文摘要:The effects of cooling rate on the microstructure of ASTM A216 WCA cast steel were studied by metallographic technique. The results show that with the increase of cooling rate, the grain size of proeutectoid ferrite decreases, the volume fraction of proeutectoid ferrite and acicular ferrite increases. The gravity plays an important role in the columnar-to-equiaxed transition (CET) during solidification.