网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->预发布刊期->录用待安排稿件


Ca对Mg-5.5Al-1.2Y镁合金显微组织和力学性能的影响
Effects of Ca on Microstructure and Mechanical Properties of Mg-5.5Al-1.2Y alloy Magnesium Alloy
李长青
点击:3128次 下载:0次
作者单位:河南科技大学
中文关键字:Ca;镁合金;显微组织;力学性能
英文关键字:Ca; magnesium alloy; microstructure; mechanical properties
中文摘要:采用XRD、OM、SEM和EDS等手段研究了Ca对Mg-5.5Al-1.2Y合金的显微组织和力学性能的影响。实验结果表明,加入适量的Ca后, Mg17Al12相数量减少,Al2Y相得到细化,同时基体中出现高熔点相Al2Ca相和Al4Ca。随着Ca含量的增加,合金的室温(25℃)和高温(150℃和175℃)力学性能先升高后降低,且在Ca含量为0.8%时达到最佳。
英文摘要:The effects of Ca on the microstructures and mechanical properties of Mg-5.5Al-1.2Y magnesium alloy were investigated through OM, SEM, EDS and XRD. The results show that appropriate addition of Ca into Mg-5.5Al-1.2Y magnesium alloy can reduce the quantity of β-Mg17Al12 phase, refine Al2Y phase and cause the formation of high-melting-point phase Al2Ca and Al4Ca in the matrix. With the increase of Ca addition, the mechanical properties of the alloys at room and elevated temperature(150℃ and 175℃) increase at first, and then decreases, and reach the peaks at 0.8% Ca.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发