网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->预发布刊期->录用待安排稿件


加热温度对9SiCr球化退火组织的影响
The effect of heating temperature on the microstructure of 9SiCr spheroidized
欧活军,董立新,周友龙,刘力菱,钱梁
点击:3017次 下载:0次
作者单位:西南交通大学
中文关键字:9SiCr 等温球化退火 加热温度 球化组织
英文关键字:9SiCr,isothermal spheroidizing annealing, heating temperature, spheroidized microstructure
中文摘要:本文对9SiCr采取了不同的等温球化退火工艺,以研究加热温度对其球化组织的影响。经试验结果对比表明:当加热温度采用790oC时,处理后材料的球状珠光体颗粒细小,分布均匀,没有偏聚现象,同时也没有片状珠光体存在,硬度值最低,该工艺达到了最佳的等温球化退火效果.
英文摘要:To study the effect of heating temperature on the microstructure of 9CrSi spheroidized, many different isothermal spheroidizing annealing processes are employed. The results demonstrate that the paritcles in the sheroidite of the specimen that is treated at the temperature of 790 oC are fine in size and distributed homogeneously. In addition, there is no segregation of cementite and no pearlite in the microstructure of the specimen and the hardness of the specimen is minimum. Thus, the isothermal spheroidizing annealing process is the optimum heat treatment.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发