网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->预发布刊期->录用待安排稿件


不同电解液体系对铸造铝合金微弧氧化陶瓷层的影响
Different electrolyte systems on Micro-arc oxidation ceramic layer casting aluminum alloy
牛犇
点击:2233次 下载:0次
作者单位:贵州大学材料与冶金学院
中文关键字:铸造铝合金;微弧氧化;电解液体系
英文关键字:cast aluminum alloy;microarc oxidation;electrolyte system
中文摘要:在硅酸盐、铝酸盐、磷酸盐体系中分别对铸造铝合金进行微弧氧化正交试验,得到溶液的最佳配比找出三体系下的最优试样,比较试样的膜厚,表面硬度,表面形貌及相组成,结果表明:膜层厚度为硅酸盐体系下最大,铝酸盐和磷酸盐体系差别不大,显微硬度磷酸盐体系下最大其他两体系相差不大。三体系微弧氧化膜表面光滑其中磷酸盐最好,铝酸盐次之,硅酸盐相对差点。膜层的相组成主要有α-Al2O3组成。
英文摘要:In the silicate,the aluminate,the phosphate system carry on the micro-arc oxid- ation to the casting aluminum alloy to oxidize orthogonal test separately,Solution of optimum proportion to find three under the optimal sample system, Comparison of sample thickness,surface hardness, surface morphology and phase composition, the result indicated:The film thickness for silicate system is maximum, the aluminate and phosphate system have little difference, microhardness in phosphate system is the maximum and the last two other system have little difference. The three system of microarc oxidation coatings of smooth surface , the phosphate system is best , the aluminate system is second, the silicate system is last. The film is composed mainly of α-Al2O3.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发