网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->预发布刊期->录用待安排稿件


等离子喷涂常规和纳米热障涂层隔热性能
Thermal Insulation Capability of Plasma-sprayed Conventional and Nanostructured ZrO2-7%Y2O3 Thermal Barrier Coating
王东生,田宗军,杨斌,黄因慧
点击:2329次 下载:0次
作者单位:铜陵学院机械工程系
中文关键字:等离子喷涂;热障涂层;纳米涂层;隔热性能
英文关键字:plasma spraying; thermal barrier coating; nanostructured coating; thermal insulation capability
中文摘要:采用等离子喷涂工艺在TiAl合金表面制备常规和纳米ZrO2-7%Y2O3(质量分数)热障涂层,分析了两种涂层的组织结构,并对其隔热性能进行了比较。结果表明,等离子喷涂常规热障涂层呈典型的层状堆积特征,而纳米涂层为特殊的两相结构。相对于常规涂层,纳米涂层有较好的隔热性能。在1100℃时,等离子喷涂常规及纳米涂层的隔热温度分别为83℃和127℃。
英文摘要:Conventional and nanostructured ZrO2-7%Y2O3 (mass fraction) thermal barrier coatings (TBCs) were deposited on TiAl base alloy substrates by the plasma spraying technique. The microstructures and thermal insulation capability of the two types of coatings were comparatively researched. The results show that the tradition coating has a typical laminated structure. However, the nanostructured coating exhibits a bimodal microstructure consisted of fully melted regions and partially melted regions. The nanostructured coating has better thermal barrier effect than the conventional coating. The temperature drops of conventional and nanostructured coatings measured at 1100 ℃ are 83 ℃ and 127 ℃ respectively.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发