铝合金表面吸收率对焊缝成型的影响
Effect of Aluminum Alloy Surface Absorptivity on Weld Shape
胡敏英， 时君伟， 蔡金金
点击：3445次 下载：0次
作者单位：河北农业大学 机电工程学院，河北 保定 071001
中文关键字：铝合金；表面吸收率；激光焊接
英文关键字：aluminum alloy; surface absorptivity; laser welding
中文摘要：用有限元方法建立了铝合金激光焊接模型，采用ANSYS软件模拟了铝合金激光焊接过程中铝合金表面吸收率对焊接过程的影响。结果表明，当铝合金表面吸收率从10%增加到30%时，背面熔透时间下降十分明显，而表面吸收率继续增加，背面熔透时间下降不再明显; 在选择表面涂层时，只要所选物质对激光的吸收率超过30%即可满足要求，不必过于追求高吸收率。
英文摘要：The model of laser welding aluminum alloy was set up by means of finite element method. The changes of surface absorptivity with different laser power were simulated by ANSYS. The time of back fusion declines quite clearly when surface absorptivity increases from 10% to 30%, and the decrease is not evidence while surface absorptivity keeps on increasing. It can be chosen when the absorptivity rate of surface coat to laser power reaches 30%, and it is not necessary to pursue high absorptivity rate.