网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


稀土Ce对Al4.5Cu合金性能的影响
Effect of Rare Earth Cerium on Properties of Al4.5Cu Alloy
应建中1, 谢世坤1, 易荣喜1, 张庭芳2
点击:3538次 下载:0次
作者单位:1. 井冈山大学 工学院, 江西 吉安 343009; 2 . 南昌大学 机电工程学院, 江西 南昌 330029
中文关键字:Al4.5Cu合金; 稀土Ce; 体积收缩; 微观组织; 斜坡浇注
英文关键字:Al4.5Cu alloy; rare earth cerium; volume shrinkage; microstructure; pouring slope
中文摘要:研究了稀土Ce对Al4.5Cu合金微观组织、凝固区间和凝固过程体积变化的影响。结果表明,稀土Ce对合金微观组织、凝固区间和凝固体积收缩有明显的影响。稀土Ce加入量为4%时,Al4.5Cu合金固液两相区间温度为640~600℃,合金晶粒组织细化,圆整;体积收缩率仅为未加Ce时的68.6%。
英文摘要:The effects of adding rare earth cerium on microstructure, solidification range and volume changes of Al4.5Cu  alloy in solidification process were researched. Experimental results show that rare earth cerium has remarkable  effects  on  microstructure,  solidification  and  solidification shrinkage interval of the alloy. When the adding of  rare earth cerium is about 4 wt%, the range temperature of solid-liquid zone of  Al4.5Cu alloy is from 640 ℃ to 600 ℃. The grain of the alloy is refined, round. The volume shrinkage is only 68.6% of that  without rare earth cerium.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发