基于热力耦合的42CrMo曲轴预成形动态再结晶模拟分析
Simulation Analysis on Dynamic Recrystallization of 42CrMo Crankshaft in Pre-forging Based on Thermo-mechanical Coupling
周 杰， 骆 刚， 权国政
点击：2849次 下载：0次
作者单位：重庆大学 材料科学与工程学院，重庆400044
中文关键字：曲轴；动态再结晶；微观组织演变；晶粒尺寸
英文关键字：crankshaft; dynamic recrystallization; microstructure evolution; grain size
中文摘要：利用刚粘塑性有限元与动态再结晶演化热力耦合的方法，进行了42CrMo曲轴预成形过程变形与动态再结晶的热力耦合模拟，分析发现曲轴锻件内部有50.280%的区域完全动态再结晶，即获得锻造改性，约有11%的区域动态再结晶体积分数为86%。同时选取了曲轴的一个平衡块，分析了平衡块部位动态再结晶晶粒的分布规律，模拟发现细晶区主要分布在等效应变较大的心部、挨着毛边的区域，而粗晶区分布在平衡块的上下两侧区域。
英文摘要：The deformation and dynamic recrystallization of 42CrMo crankshaft in pre-forming process was simulated, using the coupled thermo-mechanical analysis method of rigid viscoplastic finite element and the evolution of dynamic recrystallization. About 50.280% zone of the forging piece was modified completely, about 11% zone of the forging piece was modified by 86% of volume. Analyzing distribution law of dynamic recrystalli zation in a balancing weight of the crankshaft, the results show that fine-grained zone is distributed in the center of the balancing weight, closing edges zone. The coarse grain zone is distributed in the up and down sides of the balancing weight.