网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


X80管线钢在东南酸性土壤环境中的电化学腐蚀特征研究
Study on Electrochemical Corrosion Characteristics of X80 Pipeline Steel in Simulated Medium of Southeastern Acid Soil
胥聪敏1, 陈 勇2, 王玉柱2, 王礼平2, 罗金恒3
点击:3661次 下载:0次
作者单位:1. 西安石油大学 材料科学与工程学院, 材料加工工程重点实验室, 陕西 西安 710065; 2. 塔里木油田销售事业部,新疆 库尔勒 841000; 3. 中国石油天然气集团公司 管材研究所, 陕西 西安 710065
中文关键字:X80管线钢; 退火处理; 电化学腐蚀; 酸性土壤; 模拟溶液
英文关键字:X80 pipeline steel; annealing treatment; electrochemical corrosion; acid soil; simulating solution
中文摘要:采用电化学测试、扫描电镜观察、表面能谱分析及X射线衍射等方法,研究了原始态与退火处理态的X80管线钢在东南酸性土壤模拟溶液中的电化学腐蚀特征与机理,分析了热处理工艺和腐蚀时间等因素对X80钢极化曲线的影响。结果表明,退火态X80钢耐蚀性低于原始态,这主要与X80钢组织因热处理发生改变有关;随着浸泡时间的延长,原始态与退火态的X80钢在东南酸性土壤模拟溶液中腐蚀趋势均减小,而腐蚀速率先增大后减小;其阴极过程受析氢腐蚀和吸氧腐蚀联合控制;腐蚀产生的锈层主要由FeOOH(表层)和Fe3O4(内层)组成,而腐蚀产物膜的完整性和致密性影响了X80钢表面的腐蚀过程,使管线钢表面的腐蚀破坏程度增加。研究还发现,氯离子含量是影响腐蚀的主导因素。
英文摘要:The corrosion behavior of X80 pipeline steel in simulated solution of southeastern acid soil was investigated using electrochemical measurement, scanning electron microscopy (SEM), energy dispersive spectrum (EDS) and X-ray diffraction (XRD). The effects of heat treatment process and corrosion time on the polarization curves were analyzed. The results show that the change of microstructure by annealing treatment accelerates the corrosion of X80 steel, which is worse than that of original state, the corrosion rate increases first and then reduces. The cathodic reactions are dominated by oxygen reduction and hydrogen evolution reaction. The corrosion products consist of FeOOH (surface layer) and Fe3O4 (inner layer). The integrality and compactness of corrosion product films influence the corrosion process, and increase the corrosion damage of X80 steel surface. The content of Cl- dominates the corrosion severity.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发