网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


含钒双相钢临界区热处理温度的研究
Research on Critical Heat Treatment Temperature of Dual-phase Steel with Vanadium
田志强, 唐 荻, 江海涛, 孙婷婷
点击:3483次 下载:0次
作者单位:(北京科技大学 高效轧制国家工程研究中心, 北京 100083)
中文关键字:双相钢; 临界区; 钒
英文关键字:dual-phase steel; intercritical zone; vanadium
中文摘要:采用扫描和透射电镜对模拟连续退火处理的试样进行分析,对含钒双相钢临界区的热处理温度和钢中钒的存在状态进行了研究。结果表明,在其他工艺条件相同时,随临界区热处理温度升高,双相钢的强度降低。双相钢中的钒主要以两种状态存在,一种是以析出物的状态存在,一种是在马氏体中以固溶状态存在,双相钢中的钒起到析出强化、细化晶粒和提高淬透性的作用。
英文摘要:The effects of intercritical heat treat temperature on properties and vanadium distribution of dual-phase steel with vanadium were studied by SEM and TEM. The results show that the strength reduces with intercritical annealing temperature going up, while other process condition is same. Vanadium has two kinds of existent states, one is precipitate in ferrite, another one is solute in martensite, the main roles of vanadium in dual-phase steel is precipitation strength, refining grain size and rising hardenability.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发