热锻模膛MoSi2 增强镍基合金表面覆层试验研究
Research on MoSi2 Reinforced Ni-based Alloy Cladding of Chamber Surface for Hot Forging Die
李江恒, 李爱农, 王华昌
点击：3009次 下载：0次
作者单位：武汉理工大学 材料科学与工程学院, 湖北 武汉 430070
中文关键字：热锻模； MoSi2增强； XRD； 热物性参数
英文关键字：hot forging die; MoSi2 reinforcement; XRD; thermal physical parameters
中文摘要：以W6Mo5Cr4V2高速钢为基体，在其表面利用MoSi2陶瓷粉末配制的Ni基自熔性合金粉末进行高频感应加热熔覆，制得不同MoSi2配比的Ni基合金覆层；对覆层横剖面进行微观组织分析和显微硬度测试，并对熔覆层的热物性参数进行测定及分析讨论。结果表明：MoSi2含量为35%的粉块制得的增强Ni基覆层具有致密的组织结构，其硬度较基体有显著提高，界面结合良好，覆层获得较好的热物性参数值，对模膛起到强化作用。
英文摘要：Using high frequency calefaction equipment, MoSi2 ceramic powder and Ni-based self-fluxing powder blended in different proportion were cladded on W6Mo5Cr4V2 steel surface. And Ni-based alloy claddings with different MoSi2 content were obtained. The microstructure of cross-section of the claddings were analyzed; the microhardness and multi-physical parameters of the claddings were measured. The results show that the cladding layer with 35% MoSi2 obtains compact microstructure, good interfacial bonding, improved hardness relative to matrix steel, and preferable thermal physical parameters, which enhances the chamber surface strength of hot forging die.