汽车连接杆的失效分析
Failure Analysis of Joint Lever Used in Automobile
郑 周,崔国栋,高国庆,杨 川
点击:3414次 下载:0次
作者单位:(西南交通大学 材料科学与工程学院,四川 成都 610031)
中文关键字:连接杆;断裂;针状马氏体
英文关键字:joint lever; fracture; needle type martensite
中文摘要:某厂生产的汽车连接杆在低应力下断裂,采用宏观断口分析、金相分析、扫描电镜断口分析等方法对断裂连杆进行了分析。结果表明,在连接杆焊缝附近的热影响区中存在大量针状马氏体组织,在低应力的作用下,导致材料发生脆性断裂。
英文摘要:The automobile joint lever produced by a certain factory, fracture at low stress, was analyzed by macrofractography, metallographic analysis, electronmicroscope fracture analysis and so on. The result shows that the fracture mode is low stress brittle fracture. The fracture is mainly caused by needle type martensite in the heat affected zone of the weld joint.