热处理对加Al改性HP40合金组织的影响
Influence of Heat Treatments on Microstructure of HP40 Alloy Modified by Al
曾 丽1, 陈纪东2, 喇培清3, 刘致远3
点击:3460次 下载:0次
作者单位:1. 浙江工业职业技术学院 数字控制工程学院, 浙江 绍兴 312000; 2. 绍兴市质量技术监督检测院, 浙江 绍兴 312000; 3. 兰州理工大学 甘肃省有色金属新材料国家重点实验室, 甘肃 兰州 730050
中文关键字:HP40合金; 热处理; (Fe,Ni)Al相; 显微组织
英文关键字:HP40 alloy; heat treatment; (Fe,Ni)Al phase; microstructure
中文摘要:通过光学显微镜和电子探针研究了热处理对含铝(质量分数)5%~10%的HP40合金组织的影响。结果表明:选择合适的热处理工艺,能使铸态合金中的沉淀相均匀析出;当固溶温度较高时,可观察到析出相非常均匀且尺寸较小。在1220 ℃及其以上温度固溶处理时,合金中的沉淀相才能完全固溶于基体。
英文摘要:Influence of heat treatment on the microstructure of HP40 alloys with 5%~10% Al was investigated by optical microscope and EPMA-1600. The results show that the distribution of the precipitation of the alloy as-cast is homogeneous if a reasonable heat treatment procedure is chosen. The precipitation is very symmetrical and the size of it diminishs with the increase of solution temperature. The precipitation can completely dissolve into the matrix when the soluble temperature above 1220 ℃.