网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


Ni/Sn固液扩散偶相界面的实验研究
Experimental Study on Interface of Ni / Sn Solid / Liquid Diffusion Couple
杨亚锋, 李世春
点击:3217次 下载:0次
作者单位:(中国石油大学 (华东)机电工程学院, 山东 东营 257061)
中文关键字:Ni/Sn扩散偶; 扩散层; 金属间化合物
英文关键字:Ni / Sn diffusion couple; diffusion layer; intermetallic compound
中文摘要:采用“坩埚法”制备了曲面的Ni/Sn固液扩散偶,将扩散偶置于SK2管式电阻炉中在不同的工艺条件下进行热处理,利用光学显微镜和电子探针微区分析技术对相界面的变化和扩散层的成分进行观察和分析。结果表明,Ni/Sn扩散溶解层的厚度和层数随温度的升高和时间的延长而增加,生成金属间化合物的顺序依次为Ni3Sn4、Ni3Sn、Ni3Sn2。
英文摘要:Ni/Sn solid/liquid diffusion couples with curving interfaces were prepared by crucible-type mechanical method. The heat treatment of diffusion couples was carried out under different conditions in SK2 resistor furnace. The change of phase interface and composition of diffusion layers was analyzed by optical microscope and scanning electron microscopy. The results show that the thickness and the number of the diffusion layers increase with the increase of heat-treatment temperature and time. Intermetallic compounds (Ni3Sn4, Ni3Sn, Ni3Sn2) appear between the interfaces in the diffusion couples in order.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发