网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


改良铸造铝硅合金高温抗氧化性能的研究
Study on High Temperature Oxidation Resistance of Modified Al-Si Casting Alloy
黄晓珍1, 苏广才1, 艾香红2, 覃 天1
点击:3277次 下载:0次
作者单位:(1. 广西大学 材料科学与工程学院,广西 南宁 530004; 2. 哈尔滨工业大学 材料科学与工程学院,黑龙江 哈尔滨 150006)
中文关键字: 改良; 铸造铝硅合金; 高温抗氧化性能
英文关键字:modified; Al-Si casting alloy; high temperature oxidation resistance
中文摘要:在铸造铝硅合金基础上, 添加Cu、Ni、Mn、V、RE等合金元素研制了改良铸造铝硅合金,并在相同的条件下,将改良铸造铝硅合金与ZL101进行了高温抗氧化性能对比试验。结果表明,改良铸造铝硅合金随着氧化时间的延长,材料表面的氧化膜逐渐长大、 加厚, 形成均匀、 致密、 完整的氧化膜, 对基体有很好的保护作用; 材料300 ℃氧化动力学曲线遵循对数规律, 400 ℃遵循抛物线规律。这表明改良合金热力学与动力学稳定性比较好,抗氧化性能比ZL101好。
英文摘要:The modified Al-Si casting alloy was prepared on the basic of Al-Si casting alloy by adding alloying elements of Cu, Ni, Mn, V and RE, and the high temperature oxidation resistance of the modified Al-Si casting alloy was compared with that of ZL101 at the same situation. The results show that, with the extension of oxidized time, the modified Al-Si casting alloy surface's oxide film grows up gradually, thickens, then forms an evenly distributed, compact and complete oxide film, which has excellent protection to substrate. The curve of oxidation kinetics follows the logarithm law at 300℃ and the parabola law at 400℃. The experiments show that thermodynamic and kinetic stability of the modified Al-Si alloy is good, and the oxidation resistance is better than ZL101.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发