网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


铁基多元合金堆焊层的抗软化性研究
Study on Softening Resistance of Overlay Welding Layer on Iron-based Multiple Alloying
李 顺
点击:3275次 下载:0次
作者单位:(秦皇岛职业技术学院, 河北 秦皇岛 066100)
中文关键字:堆焊层; 抗软化性; 加热温度; 保温时间
英文关键字: overlay welding layer; softening resistance; heating temperature; holding time
中文摘要:通过考察铁基多元合金堆焊层经200~600 ℃保温不同时间后的硬度变化,结合金相组织的分析,研究了铁基多元合金堆焊层的抗软化性。结果表明,该堆焊层具有较好的抗软化性,并有二次硬化现象,经500 ℃保温2 h后,出现硬度高峰值51.5 HRC;经500 ℃保温20 h后,硬度略有降低,但与焊态堆焊层硬度值相当。
英文摘要:The softening resistance of overlay welding layer on iron-based multiple alloying after heat treating at 200~600 ℃for various times was studied using microstructure observation and hardness testing. The results show that the overlay welding layer has good softening resistance and secondary hardening phenomenon, after heat treating at 500 ℃ for 2 h, its hardness has a high peak value 51.5 HRC, and after heat treating at 500 ℃ for 20 h, the hardness decreases slightly, which is close to that of as-welded samples.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发