网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


强磁场对硅锰铸钢等温珠光体转变的影响
Influence of High Magnetic Field on Isothermal Pearlite Transformation of Si-Mn Casting Steel
赵 辉, 周晓玲, 董旭刚, 林 波
点击:3120次 下载:0次
作者单位:(昆明理工大学 材料学院, 云南 昆明 650093)
中文关键字:强磁场; 珠光体; 等温转变; 硅锰铸钢
英文关键字:high magnetic field; pearlite; isothermal transformation; Si-Mn casting steel
中文摘要:对硅锰铸钢在强磁场下低于A1点的等温珠光体转变组织及性能进行了研究。结果表明,强磁场明显促进了珠光体的转变, 珠光体的转变量随磁场强度的升高而增加, 磁场作用时间的延长也会使珠光体转变量增加。在珠光体长大过程中, 强磁场促使渗碳体由分叉的短杆状趋向更完整片层,两相趋于平行排列,且随磁场强度的增加,铁素体和渗碳体片层宽度均呈下降趋势,片层间距减小。
英文摘要:The microstructure and properties of Si-Mn casting steel in pearlite isothermal transformation were studied under high magnetic field below A1 point. The results show that high magnetic field obviously accelerates pearlite transformation, and the quantity of pearlite increases with the increase of magnetic field intensity and holding time. When pearlite grows, high magnetic field urges trending of podgy cementite into integrated flakes, and two phases turn to be parallel, with the increase of magnetic field intensity, the width of ferrite and cementite flakes decreases, the space between two phases also decreases.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发