高合金钢管穿孔顶头氧化工艺研究
Study on Oxidation Process for Piercing Plug Made of High-alloy Steel
王 萍1,2, 黄贞益2 ,3, 王光朋2 ,3
点击:3280次 下载:0次
作者单位:1. 安徽工业大学 工商学院, 安徽 马鞍山 243002; 2.安徽工业大学 金属材料与加工重点实验室, 安徽 马鞍山 243002; 3. 安徽工业大学 材料科学与工程学院, 安徽 马鞍山 243002
中文关键字:高合金钢管; 穿孔顶头; 氧化工艺
英文关键字:high-alloy steel pipe; piercing plug; oxidation process
中文摘要:设计了顶头表面氧化工艺试验装置,通过在可控保护气氛环境下进行的顶头热处理实验,研究了氧化介质的混合比、滴量、炉压及是否通N2等对氧化层厚度、结构、组织及成分的影响,确定了最佳氧化工艺,使顶头表面生成完整的、宏观致密光滑的、与顶头基体有良好粘附性的氧化层, 有效地提高了穿孔顶头的使用寿命。
英文摘要:The surface oxidation test equipment of piercing plug was designed. The heat treatment test for the plug was carried on the controllable protection atmosphere environment, the influence factors such as oxidation mixing ratio, drops, furnace pressure and adding N2 or not on the oxidation depth, structure, microstructure and composition were studied, the best oxidation process was determined. The compact and smooth oxide layer produced on the surface of the plug, and the adhesion is good, which improve the life of the piercing plug.