网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


调整处理对沉淀硬化不锈钢组织和性能的影响
Effect of Adjusting Treatment on Microstructure and Properties of Precipitation-hardening Stainless Steel
陈国辉1, 张小聪1, 刘江文2, 罗承萍2
点击:3199次 下载:0次
作者单位:1. 广州机电工业研究所, 广东 广州 510663; 2. 华南理工大学, 广东 广州 510640
中文关键字:PH15-7Mo; 沉淀硬化不锈钢; 调整处理; 硬度
英文关键字:PH15-7Mo; precipitation-hardening stainless steel; adjusting treatment; hardness
中文摘要:利用光学金相显微镜、X射线衍射仪和扫描电镜等分析和研究了调整处理温度对PH15-7Mo钢组织和性能的影响。结果表明:PH15-7Mo钢调整处理后的组织由奥氏体、马氏体和铁素体组成,不同调整处理温度影响Ms点的变化,低温调整处理后材料Ms点有较大的提高,调整处理后冷却到室温有较多的板条马氏体形成转变,其硬度相对高温调整处理较高。
英文摘要:The microstructure and properties of PH15-7Mo steel after adjusting treatment were studied by optical metallography,XRE and SEM. The results show that the microstructure of the steel after adjusting treatment consists of austenite-ferrite and martensite. Different adjustment temperatures affect the Ms point. The Ms point increases and more martensite is transformed after adjusting treatment at lower temperature and cooled to room temperature. The hardness of the steel by lower temperature adjusting treatment is higher than that by higher temperature adjusting treatment.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发