网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


某型牵引车后半轴断裂失效分析
Analysis on Fracture Failure of Rear Semi-axle of Certain Type Tractor
李晓鹏1, 李明珠1, 魏红军2
点击:2842次 下载:0次
作者单位:1. 陕西工业职业技术学院 材料工程系, 陕西 咸阳 712000; 2. 西北机电工程研究所, 陕西 咸阳 712000)
中文关键字:半轴; 断裂; 失效; 金相检验; 疲劳
英文关键字:semi-axle; fracture; failure; metallography test; fatigue
中文摘要:某型牵引车后半轴在使用中发生断裂,通过对失效车轴进行宏观检查、断口分析、金相组织检验、化学成分分析、性能测试和运行状况调查等,对断裂原因进行了分析。结果表明,该轴热处理上存在的不合理之处,导致轴在服役早期出现微裂纹,部分微裂纹在工作应力的作用下疲劳扩展,最终产生疲劳断裂。
英文摘要:The rear semi-axle of certain type tractor fractured in early stage of service life. Through macrography, fracture surface analysis, metallography test, chemical composition analysis, performance test and operation status investigation, the fracture cause was found out. The results show that the axle has defects in heat treatment, which leads to micro crack in early stage of service life and the extended crack finally causes fatigue fracture.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发