镶嵌铸铁圈预渗工艺及组织结构的对比研究
Contrast Research on Microstructre and Pre-infiltration Process of Mosaic Iron Ring
冯士活
点击：3319次 下载：0次
作者单位：(浙江工贸职业技术学院 汽机系，浙江 温州 325003)
中文关键字：镶圈活塞； 预渗工艺； 对比研究； 结合强度； 组织
英文关键字：piston with ring; pre-infiltration process; contrast research; bonding strength;microstructure
中文摘要：采用镀锌法、铝锌法、渗铝法三种预渗工艺来制备嵌入高镍奥氏体铸铁圈的大功率发动机的活塞，对比研究了该工艺条件下结合层的组织结构、强度等。结果表明，以上三种预渗处理对结合层的结合强度各有优势，且在实际生产中均可采用。
英文摘要：The three kinds of pre-infiltration processes, such as galvznizing, aluminum-zincing and aluminizing, were used to prepare powerful engine embeds austenitic iron ring piston containing high-nickel. The microstructure and strength of the bonding layer prepared by the above processes was investigated. The results show that, the three processes have different advantages on the bonding strength of the pistons, can all be adopted in actual production.