P20预硬塑料模具断裂原因分析
Crack Failure Analysis of P20 Pre-hardened Plastic Die
任丽宏, 宗 铎, 侯彩云, 张晨东
点击:3092次 下载:0次
作者单位:中国兵器科学研究院 宁波分院, 浙江 宁波 315103
中文关键字:P20; 硫化物夹杂; 带状组织; 断裂
英文关键字:P20; sulphides inclusion; lamellar structure; crack
中文摘要: 采用热处理工艺,化学成分分析、力学性能、金相检验及综合分析等方法对P20模具断裂原因进行分析。结果表明: 模具材料中硫化物夹杂含量较高且尺寸偏大,同时存在锻造时模具中产生的带状组织,二者共同作用导致模具断裂。
英文摘要:The crack failure of P20 die was analyzed by heat treatment process, chemical composition checking, mechanical properties, metallography inspection. The results show that there are large contents of sulphides inclusions with higher size in the die material. The lamellar structure also exists in the die. The combination of them leads to the crack of the die.