网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


硅颗粒氧化对SiP /Al复合材料溶解现象的影响
Effects of Oxidation of Si Particles on Dissolution Behavior of SiP /Al Composite
谭 雯, 于家康, 薛 晨
点击:3349次 下载:0次
作者单位:(西北工业大学 凝固技术国家重点实验室, 陕西 西安 710072)
中文关键字:
英文关键字:
中文摘要:采用气压浸渗法制备了SiP/Al 复合材料,研究了Si颗粒氧化及其在铝合金液中的溶解,测定了复合材料在25~200 ℃的热膨胀系数。结果表明,调整氧化温度和保温时间可改变Si颗粒氧化程度;SiO2氧化层能有效减少Si颗粒的溶解,提高Al/Si界面的结合强度,并降低热膨胀系数值;Si颗粒在1150 ℃保温2 h后,溶解现象基本消失。
英文摘要:SiP /Al composite was fabricated by gas pressure infiltration. The oxidation and solution of Si particles in aluminum alloy as well as  CTE at 25~200 ℃ were investigated. The results show that, the degree of oxidation of Si particles can be changed with adjusting oxidation temperature and holding time. SiO2 oxide layer can reduce the dissolution of Si particles to enhance Al / Si interface bonding strength and lower the thermal expansion coefficient. After treated at 1150 ℃ for 2 h, the dissolution phenomenon of Si particles disappears.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发