网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


高电流密度电镀锌对钢板耐蚀性的影响
Influence of Platting Zn with High Current Density on Corrosion Resistance of Steel Plate
范永哲, 周 红, 马瑞娜, 李贺坤
点击:3408次 下载:0次
作者单位:(河北工业大学 材料学院, 天津 300132)
中文关键字:高电流密度; 耐蚀性; 塔菲尔曲线; 微观形貌
英文关键字:high current density; corrosion resistance; taffel curve; microcosmic appearance
中文摘要:通过塔菲尔曲线的测量,研究了高密度电流(300 A/dm2)下镀层的耐蚀性。结果表明:采用高电流密度进行电镀,其电镀层的腐蚀电位随电流密度的增大而提高(最高可达-0.845 V),腐蚀速率降低,耐蚀性增强;并且分析了高电流密度对镀层微观形貌的影响。
英文摘要:The corrosion resistance of coating with high current density was studied by measuring the taffel curve. The influence of high current density on microcosmic appearance of the coating was analyzed. The results show that with the increase of current density, the corrosion potential (Error) of the coating increases and the corrosion rate reduces, the corrosion resistance increases.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发