网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


回火和时效对1Cr12Ni2WMoVNbN马氏体热强钢组织与性能的影响
Effects of Tempering and Aging on Microstructure and Property of Martensitic
丁宏莉1, 王立民2, 张秀丽3
点击:3191次 下载:0次
作者单位:(1. 中航工业沈阳黎明航空发动机(集团)有限责任公司 质量管理部, 辽宁 沈阳 110043; 2. 钢铁研究总院 结构材料研究所, 北京 100081; 3. 东特集团抚顺特殊钢股份有限公司 技术中心, 辽宁 抚顺 113001)
中文关键字:1Cr12Ni2WMoVNbN; 马氏体热强钢; 组织与性能; 回火
英文关键字:1Cr12Ni2WMoVNbN; martensitic heat-resistant steel; microstructure and property; temper
中文摘要:研究了回火温度对1Cr12Ni2WMoVNbN钢组织与性能的影响以及高温长期时效后组织与性能的变化。结果表明:1Cr12Ni2WMoVNbN钢的回火脆性区在500 ℃左右;由于钢中含有Ni、W、Mo和V等合金元素,增强了其回火稳定性,在690 ℃以下回火时,组织中以回火马氏体为主;1Cr12Ni2WMoVNbN钢经淬火、回火,在650 ℃保温1000 h后,同未经长期时效的相比,其抗拉强度和屈服强度分别下降了8.2%和9.4%,而在500 ℃保温1000 h后,两者基本没有变化。
英文摘要:The effects of tempering temperature on microstructure and properties of 1Cr12Ni2WMoVNbN steel after long time aging at high temperature were studied. The results show that the tempering brittleness occurs at about 500 ℃. And because of Ni, W, Mo and V involved, the tempering stability of the steel enhances. When it is tempered at 690 ℃, the main microstructure is tempered martensite. Processed through quenched and tempered, after treated at 650 ℃ for 1000 h, the  tensile  strength and  yield  strength  decrease by 8.2% and 9.4% respectively compared with those of no aging. But after treated at 500 ℃ for 1000 h, the strength does not change at all.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发