网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


体积密度对纳米铜/石蜡复合材料热膨胀性能的影响
Effect of Bulk Density on Thermal Expansion Behavior of Nano-Cu / Paraffin Composite
李 灿, 刘春雷
点击:3233次 下载:0次
作者单位:浙江工业大学 机械工程学院, 浙江 杭州 310014
中文关键字:体积密度; 温敏复合材料; 体积膨胀; 石蜡
英文关键字:bulk density; thermo-sense composite; volume expansion; paraffin
中文摘要:采用高能球磨法和温压工艺制备纳米铜/石蜡复合材料,通过改变成形压力来获得不同体积密度的复合材料, 研究了体积密度对纳米铜/石蜡复合材料热膨胀性能的影响规律,并分析了体积密度对热循环性的影响。结果表明, 体积密度对纳米铜/石蜡复合材料的热膨胀性能有显著的影响,该复合材料的体积膨胀率随体积密度的增加而增大。50 ℃时,体积密度为4.62 g/cm3的复合材料具有较好的热循环性。
英文摘要:Nano-Cu/ paraffin composite was prepared by high energy ball milling and warm pressing. The composite with different bulk density was obtained by changing molding pressure. The effects of bulk density on the thermal expansion behavior of Nano-Cu/ paraffin composite were investigated. Its influence on thermal cycling was also studied. The results show that the effects of bulk density on the thermal expansion behavior of nano-Cu/ paraffin composite are obvious. The volume  expansion  of  the  composite  increases with the increase of bulk density. The composite  with the bulk density of 4.62 g/cm3 has better thermal cycling properties at 50 ℃.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发