网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


一种镍基单晶合金的凝固行为
Solidification Behavior of Nickel Based Single Crystal Superalloy
孙跃军1, 张 军2, 于 勇3
点击:3412次 下载:0次
作者单位:1.辽宁工程技术大学 材料科学与工程学院,辽宁 阜新 123000; 2.中国科学院 力学研究所,北京 100190; 3.山西煤电集团万隆实业公司,山西 太原030053
中文关键字:镍基单晶高温合金; 凝固;偏析
英文关键字: nickel based single crystal supperalloy; solidification; segregation
中文摘要:采用等温凝固方法研究了单晶镍基合金的凝固区间,利用DSC测试了合金的凝固曲线。结果表明:实验合金的液相线温度约为1380 ℃,固相线温度约为1310 ℃。合金的凝固顺序为:。单晶合金的铸态组织中,W偏析于枝晶干, Ti、Cr、Mo和Ta偏析于枝晶间,偏析程度为:Mo>Ti>Cr>Ta,Al和Co几乎不发生偏析。
英文摘要:The solidifying range of a nickel based single crystal superalloy was investigated with isothermal solidification method, and DSC was used to test the solidifying curve. The results show that the liquidus temperature of the alloy is about 1380 ℃  and the  solidus  temperature  is  about 1310℃. The solidification order of the alloy is that:
 In as-cast microstructure,  W segregates in dendrite and Ti, Cr, Mo, Ta segregate interdendrite, the degree of segregation is Mo>Ti>Cr>Ta, Al and Co almost don't segregate.
Key words: nickel based single crystal supperalloy; solidification; segregation
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发