网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


SiO2粒度对铜基摩擦材料摩擦性能的影响
Effects of SiO2 Particle Size on Tribological Behaviors of Cu-based Friction Material
吴忠亮, 韩晓明, 符 蓉, 高 飞
点击:3413次 下载:0次
作者单位:(大连交通大学 轨道交通关键材料实验室, 辽宁 大连 116028)
中文关键字:铜基摩擦材料; 摩擦磨损; SiO2; 粒度
英文关键字:Cu-based friction material; friction and wear; SiO2; particle size
中文摘要:采用粉末冶金技术制备了铜-石墨-SiO2烧结材料,利用销-盘式摩擦试验机,在摩擦速度为7.8~47.1 m/s时,研究了SiO2粒度与材料摩擦性能的关系。结果表明,随着SiO2粒度的提高,摩擦系数变化不明显,磨损率降低。
英文摘要:Copper-graphite-SiO2 sintered materials were prepared using powder metallurgy technology. The relationship between  particle  size of SiO2 and tribological behaviors of  the  sintered  materials  was  investigated  by  pin-disc-type friction tester under a series of friction velocity from 7.8 m/s to 47.1 m/s. The results show that with the increase of particle size of SiO2, the friction coefficient of the corresponding sintered materials does not change significantly, and the wear rate reduces.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发