改善钛合金自由锻件组织均匀性的研究
Research on Improving Structure Uniformity of Titanium Alloy in Open-die Forging
冯 霞1, 严昌永1, 郭鸿镇2 , 姚泽坤2
点击:3169次 下载:0次
作者单位:(1.中航工业成都飞机有限责任(集团)公司 锻压铸造公司,四川 成都 610091;2.西北工业大学 材料学院,陕西 西安 710072)
中文关键字:钛合金;自由锻; 变形程度; 高、低倍组织
英文关键字: titanium alloy; open-die forging; deformation; microstructure and macrostructure
中文摘要:提出了改善钛合金自由锻大锻件组织均匀性的措施,在宽砧上多次镦拔以及大变形后水冷。该工艺方法可以有效消除大规格钛棒存在的高、低倍组织不均匀缺陷,提高力学性能,最终获得高质量的锻件。
英文摘要:A method of improving structure uniformity of titanium alloy large forgings in open-die forging was put forward, that is upsetting and stretching again and again on a broad anvil and cooling in water after heavy deformation. The method makes the macrostructure and microstructure of the large forgings uniform and then the good mechanical properties can be achieved.