气压浸渗法制备Al2O3(s f) /Al 复合材料的缺陷分析
Analysis on Defects of Al2O3(s f) /Al Composite Prepared by Gas Pressure Infiltration
赵文侠1, 杨永顺1,2, 郭俊卿1,2, 冯 科1
点击:3220次 下载:0次
作者单位:1. 河南科技大学 材料科学与工程学院, 河南 洛阳 471003; 2. 河南省有色金属材料科学与加工技术重点实验室, 河南 洛阳 471003)
中文关键字:气压浸渗法; 铝基复合材料; 缺陷
英文关键字:gas pressure infiltration; aluminum matrix composite; defects
中文摘要:采用气压液态金属浸渗法制备了Al2O3(sf) /Al复合材料,通过X射线衍射仪、能谱仪、扫描电镜等研究手段对材料微观缺陷进行观察分析。 研究表明,影响Al2O3(sf) /Al 复合材料力学性能的主要因素有:在材料制备过程中,纤维不均匀分布造成的团聚;基体合金在加热过程中析出的Mg2Si相以及熔融金属液在浸渗预制体时所产生的显微缩孔及气孔。
英文摘要:Al2O3(s f) /Al composite was prepared by gas pressure infiltration. The fracture morphology and microstructure of the composite was investigated by X-ray diffraction, energy dispersive spectrometer and scanning electron microscope. The results indicate that the main effect factors on the mechanical properties of the composite are the void and micro-pore, the short fibers dispersing in-homogeneously and Mg2Si phase producing from matrix alloys.