网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


合金化热镀锌钢板的性能影响因素及研究进展
Influence Factors on Properties and Research Progress of Galvannealed Technology
吕家舜1,2, 李 锋2, 刘仁东2, 康永林1
点击:3123次 下载:0次
作者单位:(1. 北京科技大学 材料学院, 北京 100083; 2. 鞍钢技术中心, 辽宁 鞍山 114001)
中文关键字:合金化热镀锌; 先进高强钢; 锌淬; 预氧化; 镀层相
英文关键字:galvannealing; advanced high strength steel; zinc quenching; pre-oxidation; coating phase
中文摘要:叙述了影响合金化热镀锌板性能的各种因素,包括镀锌原板(钢板品种、表面质量、微合金化元素)、热浸镀及合金化过程工艺参数、锌锅内化学元素、镀层相组成等对合金化热镀锌板最终质量的影响。分析了DP、TRIP钢等先进高强钢热镀锌及合金化过程中出现的问题,针对这些问题,给出了各钢种的最佳合金化工艺及适用冲压等使用条件要求的镀层相组成。
英文摘要:The influence factors on the properties of galvannealed steel strip, including the original cold rolling strip surface quality, variety of steel and microalloy elements, the technical parameters of galvanizing and annealing, the elements in zinc pool and the phases of the coating were reviewed. The problems and the measurements in the galvanizing and annealing process of advanced high strength steel were discussed. The best annealing process of some kinds of steel and the phases component adapt for pressing was expatiated.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发