网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


时效温度对Ti-6Al-2Mo-1.5Cr-2Sn-2Zr-1V-0.4Fe-0.15Si合金显微组织的影响
Effect of Aging Temperature on Microstructure of Ti-6Al-2Mo-1.5Cr-2Sn-2Zr-1V-0.4Fe-0.15Si Alloy
宋 淼, 马英杰, 刘羽寅, 雷家峰
点击:2643次 下载:0次
作者单位:(中国科学院金属研究所 钛合金研究部, 辽宁 沈阳 110016)
中文关键字:钛合金; 时效处理; 显微组织; 透射电镜
英文关键字:titanium alloy; aging treatment; microstructure; transmission electron microscopy
中文摘要:采用金相显微镜、X射线衍射(XRD)和透射电子衍射(TEM)等方法研究了时效温度对一种(α + β)两相钛合金显微组织的影响。结果表明:时效温度对合金中初生α相形貌的影响较小,但α稳定元素Al和β稳定元素Mo、Cr等在初生α中的变化呈相反规律;随时效温度的升高,合金中β相的晶格常数逐渐变大,并且次生α相的尺寸呈现一定的粗化,但次生α相的体积分数变化较小。TEM研究显示,次生α相与β相符合经典的取向关系。
英文摘要:The effects of aging temperature on microstructure of Ti-6Al-2Mo-1.5Cr-2Sn-2Zr-1V-0.4Fe-0.15Si alloy were investigated by metallographic microscope, XRD and TEM methods. The results show that the aging temperature has little effect on the morphology of  α phase, while the α stabilizer element Al has an opposite change pattern with the typical β stabilizer elements Mo and Cr; the lattice parameter of β phase increases with the increase of aging temperature; the secondary α coarsens slightly, but the volume fraction of the secondary α remains stable. The orientation relationship between the secondary α and β phase accords with the classical relationship.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发