网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


热变形参数对GH690合金晶粒细化的影响
Effects of Hot Deformation Parameters on Grain Refinement of GH690 Alloy
彭海健, 李德富, 郭青苗, 郭胜利
点击:3681次 下载:0次
作者单位:(北京有色金属研究总院 有色金属加工事业部, 北京 100088)
中文关键字:GH690合金; 热变形; 动态再结晶; 晶粒细化
英文关键字:GH690 alloy; hot deformation; dynamic recrystallization; grain refinement
中文摘要:采用Gleeble-3500热模拟试验机进行高温等温压缩试验,研究了热变形参数对GH690合金晶粒细化的影响。结果表明:当变形程度较小时,随着真应变的增加,GH690合金动态再结晶的晶粒尺寸逐渐减小,但当真应变达到0.5后,随着真应变继续增加,动态再结晶晶粒尺寸变化不大;动态再结晶晶粒尺寸随变形温度的升高而增大,随应变速率的增大而减小。建立起热变形条件即Z参数与动态再结晶晶粒尺寸的关系。
英文摘要:The effects of hot deformation parameters on grain refinement of GH690 alloy were studied by isothermal compression using Gleeble-3500 simulated machine. The results show that the size of dynamic recrystallization grain of GH690 alloy decreases with the increase of strain when the strain is relatively small and changes little after the strain reaches 0.5, and  decreases with the increase of strain rate and increases with the increase of deformation temperature. The relationship between the size of dynamic recrystallization grain and Z-parameter is established.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发