网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


采用改进的SHPB方法对闭孔泡沫铝的动态压缩性能的研究
Study on Dynamic Compressive Properties of Closed-cell Foamed Aluminum Using Improved SHPB Method
李志武1, 许金余1,2, 范飞林1, 苏灏扬1
点击:3732次 下载:0次
作者单位:(1. 空军工程大学 工程学院机场建筑工程系, 陕西 西安 710038; 2. 西北工业大学 力学与土木建筑学院, 陕西 西安 710072)
中文关键字:闭孔泡沫铝; 动态压缩性能; 分离式Hopkinson压杆; 应变率效应
英文关键字:closed-cell foamed aluminum; dynamic compressive properties; split Hopkinson pressure bar(SHPB); strain rate effect
中文摘要:采用改进的分离式霍普金森压杆,分别对长度为10、16  mm的闭孔泡沫铝试件在不同应变率下进行了动态压缩试验,得出了相应的应力-应变曲线,分析了应变率对闭孔泡沫铝的变形、应力以及能量吸收性能的影响。结果表明:在340 ~1350 s-1下,两组试件均未能完全压实,动态压缩应力-应变曲线只存在弹性区和屈服平台区,缺少致密区;闭孔泡沫铝的变形、应力以及能量吸收性能均有明显的应变率效应。
英文摘要:The dynamic compressive properties of closed-cell foamed aluminum with the length of 10 mm and 16 mm were studied at different strain rate using improved SHPB apparatus. The corresponding dynamic compressive stress-strain curves were obtained. The effects of strain rate on the transmutation, mechanical property and energy absorption were analyzed. The results show that, under the strain rate of 340 s-1~1350 s-1, the two aluminum samples do not completely compact, the dynamic compressive stress-strain curves could be only divided into elastic region and collapse region, but lack of densification region. The transmutation, mechanical property and energy absorption have a significant effect on the strain rate of the closed-cell foamed aluminum. 
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发