焊接方法对2205不锈钢焊接接头组织与力学性能的影响
Effect of Welding Methods on Microstructure and Mechanical Properties of Welded Joint of 2205 Duplex Stainless Steel
张帅谋 1， 张雪峰2， 王小平1
点击：3394次 下载：0次
作者单位：（1.安徽机电职业技术学院 机械工程系，安徽 芜湖 124000；2.新疆采油工艺研究院，新疆 克拉玛依 834000）
中文关键字：焊接方法； 2205双相不锈钢管； 力学性能； 微观结构
英文关键字：welding methods; 2205 duplex stainless steel tube; mechanical properties; microstructure
中文摘要：分别采用焊条电弧焊(SMAW)和钨极氩弧焊(GTAW)方法对SAF2205双相不锈钢管进行对接焊，并对其焊接接头的微观组织进行了观察分析, 对接头的力学性能进行了测试。结果表明, GTAW 焊接接头中奥氏体相含量较SMAW多，其综合力学性能较SMAW更好。
英文摘要： 2205 duplex stainless steel tube was welded by metal arc welding (SMAW) and gas tungsten arc welding (GTAW). The microstructure and mechamcal properties of the welded joint were analyzed. The results show that austenite phase in GTAW welded joint is more than that in SMAW welded joint. The comprehensive mechanical properties of GTAW joint are better than that of SMAW joint