网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


冷轧Cu80Fe20合金的显微组织及性能
Microstructure and Properties of Cold Rolled Cu80Fe20 Alloys
周志明1, 唐丽文1, 曹敏敏1, 王亚平2
点击:3403次 下载:0次
作者单位:(重庆理工大学 材料科学与工程学院, 重庆 400050; 2. 西安交通大学 理学院, 陕西 西安 710049)
中文关键字:Cu80Fe20合金; 冷轧; 显微组织; 电导率
英文关键字:Cu80Fe20 alloy; cold rolled; microstructure; electrical conductivity
中文摘要:研究了室温低应变速率下大变形冷轧Cu80Fe20合金的显微组织和性能。结果表明,Cu80Fe20合金经过冷轧变形后富Fe相的显微组织呈现出明显的纤维状,显微硬度刚开始变形时上升很快,随着变形的增加,增加的幅度逐步降低;电导率随着轧制变形的增加而降低,当达到一定量的大变形后,电导率又有上升。
英文摘要:The microstructure and properties of cold-rolled Cu80Fe20 alloy under low strain rate and large deformation were studied at room temperature. The results show that the microstructure of Cr-rich phases presents obvious fibre-shape, the microhardness increases continuously with the increase of rolling strain, the electrical conductivity decreases gradually with the increase of deformation strain, however, after deforming to certain degree, the electrical conductivity increases again.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发