爆炸冲击载荷对复合板低温冲击性能的影响
Effects of Explosive Load on Impact Properties of Clad Plates at Lower Temperature
科社1,2, 赵 惠1,2
点击:3576次 下载:0次
作者单位:(1.西安天力金属复合材料有限公司,陕西 西安 710201;2.陕西省层状金属复合材料工程研究中心,陕西 西安 710201
中文关键字:爆炸载荷;复合板;低温冲击性能
英文关键字:explosive welding load;clad plate;impact property at low temperature
中文摘要:采用爆炸焊接的方法制备复合板后,复合板的低温冲击性能发生剧烈下降。针对这一现象,采用金相检验、扫描电镜和透射电镜分析法,对爆炸复合前后材料的微观组织进行了对比。结果表明,爆炸焊接后复合板晶粒内部产生了大量的位错团,使材料晶粒内部位错密度升高,从而导致材料的低温冲击性能下降。
英文摘要:A clad plate was prepared by explosive welding,however, after welding, the impact properties of the plate decrease obviously. The optical microscope, scanning electron microscope and transmission electron microscope were used to investigate the microstructure of the materials. The results indicate that a mass of dislocations emerge in the grain of the materials after explosive welding and the density of dislocations in the grains increases,which can lead to the distinctly decrease of material impact property.