网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


铜元素对镍基耐蚀合金电化学腐蚀行为的影响
Effect of Copper on Electrochemical Corrosion Behavior of Nickel-based Corrosion Resistant Alloy
郝福坤
点击:3574次 下载:0次
作者单位:大庆石化建设公司 安装分公司, 黑龙江 大庆 163711
中文关键字:镍基耐蚀合金; 阳极极化; 铜
英文关键字:Ni-based corrosion resistant alloy; anodic polarization; copper
中文摘要:采用电化学法测出了铜含量对镍基耐蚀合金在80%硫酸、30%盐酸和6%三氯化铁溶液中的阳极极化曲线,并对极化曲线中的特征值进行了分析,研究了铜含量对合金电化学腐蚀行为的影响。结果表明:铜含量为3%的合金在80%的硫酸中最耐蚀;铜含量的升高会降低其在还原性酸中的耐蚀性;铜含量为2%时,镍基耐蚀合金在6%三氯化铁溶液中最不耐蚀。
英文摘要:The anodic polarization curves of nickel-based corrosion resistant alloy in 80%H2SO4, 30%HCl and 6%FeCl3 solution were measured by electrochemical method. The anodic polarization curves were analyzed. The effects of copper content on the electrochemical corrosion behavior of the alloy were studied. The results show that the corrosion resistance of the alloy with 3% copper content is most in 80%H2SO4, the corrosion resistance of the alloy decreases with the increase of copper content in reducing acid, and the corrosion resistance of the alloy with 2% copper content is worst in 6%FeCl3 solution.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发