网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


镍铝黄铜再结晶试验研究
Research on Recrystallization of Nickel Aluminum Brass
王智祥, 王 建, 刘 峰, 张敬恩
点击:3655次 下载:0次
作者单位:(江西理工大学 材料与化学工程学院, 江西 赣州 341000)
中文关键字:镍铝黄铜; 再结晶; 冷轧; 退火; 组织
英文关键字:nickel aluminum brass; recrystallization; cold rolling; annealing; microstructure
中文摘要:对镍铝黄铜不同压加率条件下冷轧薄板进行不同工艺的等温退火试验,观察等温退火后试样的硬度及组织变化;建立布氏硬度和退火温度之间的函数及数学模型。结果表明,随冷轧压加率的提高,再结晶温度降低。
英文摘要:The isothermal annealing experiment for cold-rolled sheet of nickel aluminum brass with different temperature and time under the condition of different increasing rate in pressure was carried out. The changes of hardness and microstructure of the samples after isothermal annealing were observed. The function and mathematics model between brinell hardness and annealing temperature was established. The results show that the crystallization temperature decreases with the increase of cold pressure rate.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发