网络编辑平台

编辑出版

《热加工工艺》编辑部

  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会

  主管单位:中国船舶集团有限公司

  地址:陕西兴平市44号信箱

  邮编:713102

  电话:029-38316273

  邮箱:rjggy@vip.163.com

在线调查

相关下载

友情链接

您所在位置:首页->Label


动态应变时效对35CrMo钢力学性能的影响
Effects of Dynamic Strain Aging on Mechanical Properties of 35CrMo Steel
孙延安1,2, 李春福1, 鲁 亮1, 宋宇波2
点击:5571次 下载:0次
作者单位:1. 西南石油大学 材料科学与工程学院, 四川 成都 610500; 2. 大庆油田有限责任公司 采油工程研究院, 黑龙江 大庆 163453)
中文关键字:35CrMo钢; 动态应变时效; 慢应变拉伸; 力学性能
英文关键字:35CrMo steel; dynamic strain aging; SSRT; mechanical properties
中文摘要:采用慢应变速率拉伸、电子显微镜等现代分析方法,研究了35CrMo钢动态应变时效现象对力学性能的影响。结果表明:在应变量为5%、应变速率为5 × 10-5 s-1的不同温度(293、323、373和473 K)下动态应变时效后的35CrMo钢的伸长率变化不大,但动态应变时效后的抗拉强度均明显增加;35CrMo钢动态应变时效的最佳温度为373 K。35CrMo钢试样在室温下经过动态应变时效处理之后的室温屈服强度明显增加。
英文摘要:The effects of dynamic strain aging (DSA) phenomenon on the mechanical properties of 35CrMo steel were studied using slow strain rate stretch (SSRT), electron microscopy (SEM) and other modern analysis methods. The results show that: using the method of 5% in the strain, strain rate of 5 × 10-5 s-1 at different temperatures (293 K, 323 K, 373 K, 473 K) of dynamic strain aging, the elongation of 35CrMo steel not much changes, but  the tensile strength after dynamic strain aging(DSA) are significantly increased. The best temperature of dynamic strain aging is 373 K. At room temperature, the yield strength of 35CrMo steel strength is increased after dynamic strain aging.
读者评论

      读者ID: 密码:    点击此处进行授权 点击此处进行授权
我要评论:
国内统一连续出版物号:61-1133/TG |国内发行代码:52-94 |国际标准出版物号:1001-3814 |国际发行代码:SM8143
主管单位:中国船舶集团有限公司  主办单位:中国船舶集团有限公司第十二研究所;中国造船工程学会
开户银行:工商银行陕西省兴平市板桥支行  帐户名:中国船舶集团有限公司第十二研究所  帐号:2604031909022100458
版权所有©2024热加工工艺》编辑部 陕ICP备10008724号
本系统由北京菲斯特诺科技有限公司设计开发