column
    Research Progress and Future Research Prospect of Medium Mn Steels
    BAI Shaobin, NIU Weiqiang, XIAO Wentao, LIANG Wei, LI Dazhao
    2022, 51(14): 1-9. DOI: 10.14158/j.cnki.1001-3814.20210499
    Abstract PDF
    Development Status of Short Fiber Reinforced Aluminum Matrix Composites
    HA Rui, XIAO Wenkai
    2022, 51(14): 10-13. DOI: 10.14158/j.cnki.1001-3814.20192521
    Abstract PDF
    Research Progress of Graphene Reinforced Copper Tungsten Electrical Contact Materials
    DING Yi, ZHU Zhixiang, CHEN Xin, PANG Zhen, LIU Beiyang, HAO Liucheng, XIANG Zhonghua, MA Feiyue
    2022, 51(14): 14-17,22. DOI: 10.14158/j.cnki.1001-3814.20210443
    Abstract PDF
    Research Progress on Properties of Laser Cladding Hard Phase Enhanced Ni-based Alloy Coating
    WU Jiangru, FENG Xiaofei, HAN Rihong, QI Haibo
    2022, 51(14): 18-22. DOI: 10.14158/j.cnki.1001-3814.20200932
    Abstract PDF
    Technical Progress on Stabilization of Cold and Hot Circulation of Aluminum Alloy
    ZHANG Feng, HAN Dong, DUAN Shucang, GAO Shikai, ZHANG Xin
    2022, 51(14): 23-26. DOI: 10.14158/j.cnki.1001-3814.20193002
    Abstract PDF
    Prediction on Corrosion Rate of Pipeline Based on PCA-IABC-ELM
    LIU Wenbin, QIN Xiexun, CHEN Liangchao, TAO Wujun
    2022, 51(14): 27-31. DOI: 10.14158/j.cnki.1001-3814.20210394
    Abstract PDF
    Effects of Ambient Temperature on Corrosion Behavior of Ni47Ti44Nb9 and Ni47Ti44Nb9-3A21 Galvanic Couple
    CUI Yanyu, DILIMULATI Dilinuer, DING Qingmiao
    2022, 51(14): 32-37. DOI: 10.14158/j.cnki.1001-3814.20200074
    Abstract PDF
    Effects of Powder Pretreatment Process on Oxygen Content and Grain Size of Al-Ti Target
    LIU Quanyi, CUI Zizhen, XIE Fei, HUANG Guochao, LIN Yansong
    2022, 51(14): 38-40. DOI: 10.14158/j.cnki.1001-3814.20203155
    Abstract PDF
    Study on Corrosion Resistance of Typical Aluminum Alloys in Simulated Flue Gas Condensate
    LIU Qingkun, LIU Xianmin, ZHOU Zhangmeng, CHEN Yunbo, GONG Chuanhai, LI Yu, LI Yefei, GAO Yimin
    2022, 51(14): 41-44,53. DOI: 10.14158/j.cnki.1001-3814.20202155
    Abstract PDF
    Research on Pitting Corrosion Behavior of 445J2 Ultra-pure Ferritic Stainless Steel
    WANG Zhiwei, HOU Lifeng, DU Huayun, ZOU Yong, WU Min, FAN Guangwei, WEI Yinghui
    2022, 51(14): 45-53. DOI: 10.14158/j.cnki.1001-3814.20211077
    Abstract PDF
    Study on Microstructure and Mechanical Properties of GH4169 Bolt in Ultra-Supercritical Unit after High Temperature Operation
    WANG Zhichun, PENG Bo, FU Tie, CENG Yanping
    2022, 51(14): 54-59. DOI: 10.14158/j.cnki.1001-3814.20201397
    Abstract PDF
    Study on Quality Control of Ti6Al4V and Ti6Al4V ELI Raw Material Powders Used in Medical Additive Manufacturing
    ZHAO Danmei, KE Linnan, DU Xiaodan, HAN Qianqian
    2022, 51(14): 60-63. DOI: 10.14158/j.cnki.1001-3814.20211715
    Abstract PDF
    Simulation Analysis of Forming Process of 316L Stainless Steel by Selection Laser Melting
    MA Haibin, MA Xingchi, LIU Chang, WU Maoliang, JIE Ruiwen
    2022, 51(14): 64-69. DOI: 10.14158/j.cnki.1001-3814.20202792
    Abstract PDF
    Preparation and Properties of Graphene Reinforced Aluminum Matrix Composites
    CHANG Qingming, LI Zonglun, XU Fangyu
    2022, 51(14): 70-73,77. DOI: 10.14158/j.cnki.1001-3814.20190980
    Abstract PDF
    Analysis on Cracking Causes of Coiling Plate of Special Thick Composite Plate
    HUANG Chaopeng, XU Wenfang, ZHANG Ning, LIN Haiping, GUO Zhijun, SONG Wenming
    2022, 51(14): 74-77. DOI: 10.14158/j.cnki.1001-3814.20200813
    Abstract PDF
    Study on Microstructure and Properties of WC Particle-reinforced Fe313 Coating by Plasma Cladding
    GAO Wandong, HU Kongyou, ZHANG Xuejun, SHI Yun, WANG Sailong, DU Xiaodong
    2022, 51(14): 78-82. DOI: 10.14158/j.cnki.1001-3814.20202786
    Abstract PDF
    Study on Crack Formation Mechanism and Matching Method of Laser Cladding Nickel-based Alloy Coating
    WANG Wei, SUN Wenlei, ZHOU Haonan, XING Xuefeng, YANG Kaixin, YU Jiangtong
    2022, 51(14): 83-88. DOI: 10.14158/j.cnki.1001-3814.20210774
    Abstract PDF
    Research on Wear Characteristics of Micro-geometry of Different Finishing Surfaces
    WANG Zhiwei, XIEERYAZIDAN Adayi, LIU Junjie
    2022, 51(14): 89-93,98. DOI: 10.14158/j.cnki.1001-3814.20202884
    Abstract PDF
    Study on Microstructure and Mechanical Properties of Cu/Carbon Steel Gradient Material
    MA Tao, LI Huirong, GAO Jianxin, LI Mengxing, ZHANG Hongbo, LI Xin, LI Yungang
    2022, 51(14): 94-98. DOI: 10.14158/j.cnki.1001-3814.20192446
    Abstract PDF
    Study on Corrosion Behavior of Copper Zinc Alloy Composite Coating Prepared by Cold Spraying
    SHAO Long, WU Huishu, ZHANG Liuyan, JIE Xiaohua
    2022, 51(14): 99-102. DOI: 10.14158/j.cnki.1001-3814.20200506
    Abstract PDF
    Study on Cladding Layer Properties of Laser Cladding Fe-Ni-C Invar Alloy on 42CrMo Matrix
    LU Xin, YANG Yong, QI Kang, HU Guofang, LI Jindong
    2022, 51(14): 103-107,111. DOI: 10.14158/j.cnki.1001-3814.20201329
    Abstract PDF
    Effect of Ultrasonic Assistance on Quality of Laser Cladding Ni60 Coating
    WANG Zhan, SUN Wenlei, LIU Jinduo, XIAO Qi
    2022, 51(14): 108-111. DOI: 10.14158/j.cnki.1001-3814.20200477
    Abstract PDF
    Research on Beam Mode of Electron Beam Ring
    LI Xinkai, LIAO Guofu, ZOU Yang, XIN Zhe, XU Jiahong, WANG Mian
    2022, 51(14): 112-115,120. DOI: 10.14158/j.cnki.1001-3814.20210448
    Abstract PDF
    Study on Improvement of Friction and Wear Properties of E690 Steel by TiN and TiAlN Coatings
    WANG Jianbo, WANG Runyu, ZHANG Mingen, SU Boyong
    2022, 51(14): 116-120. DOI: 10.14158/j.cnki.1001-3814.20210934
    Abstract PDF
    Effects of High Temperature Aging on Microstructure Evolution and High Temperature Mechanical Properties of 20Cr32Ni1Nb Austenite Stainless Steel
    WANG Bin, LIU Benxin, GUO Xiaofeng, TAN Xin, GONG Jianming, CHAO Ke
    2022, 51(14): 121-125,130. DOI: 10.14158/j.cnki.1001-3814.20192437
    Abstract PDF
    Effects of Solution Cooling Modes and Aging Temperature on Microstructure and Tensile Properties of TB8 Titanium Alloy
    ZHAO Cong, SHI Xiaohui, CAO Cong, ZHANG Xinyu, GUO Ruipeng
    2022, 51(14): 126-130. DOI: 10.14158/j.cnki.1001-3814.20192309
    Abstract PDF
    Effects of Solution Temperature on Microstructure and Mechanical Properties of 5CrNiMo Alloy Steel for HVAC
    LIANG Zhili
    2022, 51(14): 131-134. DOI: 10.14158/j.cnki.1001-3814.20191546
    Abstract PDF
    Effects of Vacuum Melting, Forging and Heat Treatment on Microstructure and Properites of Cu15Ni8Sn Alloy
    ZHOU Yinyu, LI Wei, WANG Fei, ZHAI Lianna
    2022, 51(14): 135-139. DOI: 10.14158/j.cnki.1001-3814.20201200
    Abstract PDF
    Analysis on Microstructure Change of 780DP High Strength Automobile Steel during Isothermal Process
    JIANG Cailing, YE Jiang
    2022, 51(14): 140-144. DOI: 10.14158/j.cnki.1001-3814.20200330
    Abstract PDF
    Effects of Ni Addition on Microstructure and Properties of Non-oriented Silicon Steels by Twin-roll Casting Process
    ZHANG Xinghai, YANG Chao, ZHANG Lisheng
    2022, 51(14): 145-148. DOI: 10.14158/j.cnki.1001-3814.20200197
    Abstract PDF
    Effects of Solution Treatment on Microstructure and Mechanical Properties of AISI 631 Stainless Steel Strip
    WANG Xinyu, BIAN Liping, LIANG Yiwei, WANG Tao, XIONG Xiaoyan, REN Zhongkai, ZHANG Zhixiong
    2022, 51(14): 149-152. DOI: 10.14158/j.cnki.1001-3814.20200549
    Abstract PDF
    Effect of Carburizing Temperature on Carburizing Layer of 20CrMnTi Gear Ring
    FENG Wei, QIAO Jingqian
    2022, 51(14): 153-157. DOI: 10.14158/j.cnki.1001-3814.20193530
    Abstract PDF
    Cause Analysis and Suggestion of Drilling Tool Fracture in a Extended Reach Well in East China Sea
    LI Xing, LI Qian, LEI Lei, ZHAO Zhifu, FENG Wenhui
    2022, 51(14): 158-162. DOI: 10.14158/j.cnki.1001-3814.20201810
    Abstract PDF
    Email Alert RSS