column
    Development and Application of Materials for Cold Cutting Saw Blades with Ultra High Strength and Toughness
    SUN Deqin, ZHANG Liwei, JIANG Xuemei, DIAO Shuo
    2022, 51(17): 1-5,11. DOI: 10.14158/j.cnki.1001-3814.20202943
    Abstract PDF
    Application and Prospect of High Pressure Water Jet Technology in Aero-engine
    YE Junhua, LI Junchen, HE Yong, FENG Yunbiao, GUO Shuangquan, LUO Kuilin, YANG Yafei
    2022, 51(17): 6-11. DOI: 10.14158/j.cnki.1001-3814.20202656
    Abstract PDF
    Effect of Printing Orientation on Formation of Resistance Spot Welded Joint of 3D Printed Maraging Steel
    LAI Zhiyong, LUO Cheng, ZHANG Yansong
    2022, 51(17): 12-18. DOI: 10.14158/j.cnki.1001-3814.20202406
    Abstract PDF
    Study of Microstructure and Strength of Multi-alloying Hypo-eutectic Al-Si Alloy
    HUANG Xiaomei, XU Tong, ZHOU Hongwei, CHENG Hefa
    2022, 51(17): 19-21,26. DOI: 10.14158/j.cnki.1001-3814.20201819
    Abstract PDF
    Effect of Brazing Temperature on Microstructure and Mechanical Properties of TC4 Titanium Alloy Vacuum Brazing Joint
    ZHANG Xurui, SHI Zuoling, MOU Chenfei, LIU Yaodong
    2022, 51(17): 22-26. DOI: 10.14158/j.cnki.1001-3814.20202363
    Abstract PDF
    Development of Ultra-high-strength Hot-rolled Martensite Steel and Research of Microstructure and Properties
    LIU Jianan, WANG Yunhui, LI Yongliang, CHEN Tong
    2022, 51(17): 27-29,34. DOI: 10.14158/j.cnki.1001-3814.20202010
    Abstract PDF
    Effects of Rolling Process on Low Temperature Toughness of High Strength Bridge Heavy Steel Plate
    YU Hongwei, HUANG Dajun, DONG Zhongbo, WU Kaiming, LI Haifeng, BU Yong
    2022, 51(17): 30-34. DOI: 10.14158/j.cnki.1001-3814.20201510
    Abstract PDF
    Research on Microstructure and Mechanical Properties of Hot-wire Laser Narrow-gap Welding Joint of Q460 Steel
    JIA Kunning, DUAN Zhenzhen
    2022, 51(17): 35-37,42. DOI: 10.14158/j.cnki.1001-3814.20202344
    Abstract PDF
    Effect of Al-5Ti-1B Adding Position on Microstructure and Mechanical Properties of 8079 Aluminum Alloy Cast-Rolled Plate
    WANG Shan, REN Shage, ZHU Qing
    2022, 51(17): 38-42. DOI: 10.14158/j.cnki.1001-3814.20213453
    Abstract PDF
    Microstructure Evolution of 14Cr-15Ni-6Si Stainless Steel and Its Influence on Hot Working Properties
    WANG Baoshun, SHEN Hongying, SUN Wenqiang, YANG Chen, NAI Qiliang, SU Cheng
    2022, 51(17): 43-46,53. DOI: 10.14158/j.cnki.1001-3814.20201450
    Abstract PDF
    Analysis and Improvement of Casting Process of Compressor Stator Based on ProCAST
    LI Yanjie, SUN Shaochun, WANG Xiaolei, LIU Yandao
    2022, 51(17): 47-53. DOI: 10.14158/j.cnki.1001-3814.20201914
    Abstract PDF
    Influence of Latent Heat and Anisotropy on Morphology of Solidified Structure
    ZHAN Lan, SUN Sizhe, LI Zhijing
    2022, 51(17): 54-58,62. DOI: 10.14158/j.cnki.1001-3814.20201719
    Abstract PDF
    CT Scanning Characteristics and Mechanical Response of Nodular Cast Iron with Shrinkage Defects
    GONG Hongtao, LIU Jiaxin, ZHANG Wei, YANG Xiaojian, LIU Jianhao, MU Xiaoming, LIU Jun, GENG Xiaoliang
    2022, 51(17): 59-62. DOI: 10.14158/j.cnki.1001-3814.20213151
    Abstract PDF
    Optimization of Differential Pressure Casting Process for Large Complex Gearbox Case
    YAN Liangliang, LIU Jiamin, XUE Shuai, LI Jun, DUAN Zhao, ZHANG Pengtao, XUE Weiwei, LU Mengfei
    2022, 51(17): 63-65. DOI: 10.14158/j.cnki.1001-3814.20213066
    Abstract PDF
    Influence of Silicon Content on Casting Properties of High Speed Steel Machining Tool Materials
    LIAN Bingxian, FAN Wenyuan
    2022, 51(17): 66-68. DOI: 10.14158/j.cnki.1001-3814.20210797
    Abstract PDF
    Research on Aluminum Strip Rolling Thickness Prediction Based on Mechanism Model and Data-driven Hybrid Method
    ZHANG Songlin, ZHANG Fengshou
    2022, 51(17): 69-73. DOI: 10.14158/j.cnki.1001-3814.20202511
    Abstract PDF
    Mechanical Properties and Texture Evolution Characteristics of 5052 Al Alloy under Large Deformation
    YANG Yong, ZHANG Quancheng, TIAN Qingchao
    2022, 51(17): 74-78. DOI: 10.14158/j.cnki.1001-3814.20201862
    Abstract PDF
    Neural Network Optimization of Forging Temperature for New Mechanical Bearing Steel
    ZHAO Haixian, HAN Yanlong, LIU Yanling
    2022, 51(17): 79-81,86. DOI: 10.14158/j.cnki.1001-3814.20211205
    Abstract PDF
    Research on Forming Process of Deep Hole Cylindrical Parts with Bottom Flange
    ZHANG Chao, SUN Hongxing, ZHANG Jingxue, LIU Baixuan, LIU Guanghui, WANG Tao, LIU Dan, LIU Hua
    2022, 51(17): 82-86. DOI: 10.14158/j.cnki.1001-3814.20220080
    Abstract PDF
    Study on Production Technology of Q500qE Steel with Low Yield Strength Ratio and High Toughness
    BI Yongjie
    2022, 51(17): 87-90. DOI: 10.14158/j.cnki.1001-3814.20220039
    Abstract PDF
    Microstructure and Mechanical Performance of 9%Ni Steel Welded Joint Based on Nanoindentation Technology
    CHEN Yixin, LI Xiaoquan, HAO Benxing, YUN Yeling, DU Yongqin
    2022, 51(17): 91-95,101. DOI: 10.14158/j.cnki.1001-3814.20202870
    Abstract PDF
    Predictions of Shrinkage Deformation of Titanium Alloy Electron Beam Free Form Fabrication Based on ABAQUS
    ZHOU Yao, CHEN Yuhao, WU Di, TANG Bowen, LIAO Dunming
    2022, 51(17): 96-101. DOI: 10.14158/j.cnki.1001-3814.20202411
    Abstract PDF
    Research on Laser Welding for Seal Weld of AP/CAP Unit Control Rod Drive Mechanism
    YAN Guohua, SHI Xiaochen, YU Zhaohui, WEN Zhong, LI Wei
    2022, 51(17): 102-105. DOI: 10.14158/j.cnki.1001-3814.20220267
    Abstract PDF
    Hot Deformation Behavior of ER70S-6 Welding Wire Steel
    HOU Bingjie, ZHENG Xiaoping, LIU Qian, XIAO Guangyao, TIAN Yaqiang, CHEN Liansheng
    2022, 51(17): 106-110,115. DOI: 10.14158/j.cnki.1001-3814.20202254
    Abstract PDF
    Experimental Study on Selection of Hardening Criterion in Calculation of Welding Residual Stress
    GU Ying, CHEN Yujia, REN Songbo, GU Song, KONG Chao
    2022, 51(17): 111-115. DOI: 10.14158/j.cnki.1001-3814.20202058
    Abstract PDF
    Finite Element Simulation of Temperature Uniformity of 6061 Aluminum Alloy in Vacuum Brazing Furnace
    ZHANG Wenwei, TAN Yuanbiao, ZHAO Fei
    2022, 51(17): 116-120,124. DOI: 10.14158/j.cnki.1001-3814.20202193
    Abstract PDF
    Reasearch on A Hybrid Denoising Algorithm for Underwater Welding Image
    YE Jianxiong, ZHOU Wenzhen, ZHANG Zhiwei
    2022, 51(17): 121-124. DOI: 10.14158/j.cnki.1001-3814.20202687
    Abstract PDF
    Study on Wire Electrical Discharge Machining Technology of Ti-6Al-4V Titanium Alloy
    GAO Shujuan
    2022, 51(17): 125-129,134. DOI: 10.14158/j.cnki.1001-3814.20202206
    Abstract PDF
    On-site Repair of Cracking of Blast Furnace Shell and Cooling Stave
    REN Yuhong
    2022, 51(17): 130-134. DOI: 10.14158/j.cnki.1001-3814.20202331
    Abstract PDF
    Research on Weld Model and Lap Mount Based on GMAW Surfacing
    ZHOU Zhentong, ZHOU Jianping, XU Yan
    2022, 51(17): 135-139. DOI: 10.14158/j.cnki.1001-3814.20202168
    Abstract PDF
    Analysis on Non-climbing Slope of Brazing Filler Material during Brazing of Motor Rotor
    XIE Guisheng, LI Lei, WU Yuan
    2022, 51(17): 140-143. DOI: 10.14158/j.cnki.1001-3814.20212409
    Abstract PDF
    Analysis and Improvement Measures of Inclusions in Axle Steel for Railway Vehicles
    ZHAO Zhigang, ZHANG Jinwen, WANG Songwei, WANG Yutian
    2022, 51(17): 144-147. DOI: 10.14158/j.cnki.1001-3814.20202072
    Abstract PDF
    Study on Cracks of Inconel 601 Nickel-Base Alloy during Hot Reaming
    CAI Liming, WANG Kun, NAI Qiliang, XU Weiliang, TU Zhengping, PAN Pingwei, QIN Xingwen
    2022, 51(17): 148-150,154. DOI: 10.14158/j.cnki.1001-3814.20201992
    Abstract PDF
    Investigation on Causes of Cracking during Flattening of High Grade SEW Pipe Blank
    GAO Mengzhao, LI Zhoubo, YUAN Qingying, CHEN Haoming, LI Yuanzheng, HE Shilei
    2022, 51(17): 151-154. DOI: 10.14158/j.cnki.1001-3814.20213399
    Abstract PDF
    Analysis of Inner Crack of Super 304H Steel Ultra-Supercritical Boiler Tube in Hot Piercing Process
    LI Peng, KANG Xitang, CHENG Yiming, LI Taotao, TUO Leifeng, CHU Zhibing
    2022, 51(17): 155-158. DOI: 10.14158/j.cnki.1001-3814.20203246
    Abstract PDF
    Analysis of Crack in Weld Zone of 5" Weighted Drill Pipe in a Well
    CHEN Meng, OUYANG Zhiying, YU Shijie
    2022, 51(17): 159-162. DOI: 10.14158/j.cnki.1001-3814.20202442
    Abstract PDF
    Email Alert RSS