column
    Research Status on Residual Stress of Hot-rolled Special-shaped Section Steel
    LI Jie, ZHAO Xianming, WANG Xiaoqi, LI Hao
    2023, 52(9): 1-6. DOI: 10.14158/j.cnki.1001-3814.20211703
    Abstract PDF
    Research Status and Development Direction of Shear Spinning of Conical Parts
    ZHANG Yang, HAN Dong, YANG Yantao, HAN Baocheng, XU Yamei
    2023, 52(9): 7-12. DOI: 10.14158/j.cnki.1001-3814.20211396
    Abstract PDF
    Effect of Reduction Rate on Microstructure and Properties of Al-Si Coating on Hot Formed Steel
    HU Xianlei, JIANG Weiquan, ZHI Ying, FENG Xue, YUAN Yi
    2023, 52(9): 13-16,12. DOI: 10.14158/j.cnki.1001-3814.20210607
    Abstract PDF
    Study on Precipitation Behavior of Second Phase Particles during Hot Rolling of Low Carbon Steel
    YANG Zhigang, NIU Yuewei, HUANG Weili, WANG Xinwei, CHEN Siping, WANG Yu
    2023, 52(9): 17-20,25. DOI: 10.14158/j.cnki.1001-3814.20210787
    Abstract PDF
    Deformation Mechanism of Powder Metallurgy Ti-45Al-7Nb-0.3W Alloy Rolling at High Temperature and Medium Strain Rate
    CHEN Chenggui, LIANG Xiaopeng, LI Huizhong, ZHANG Qiang
    2023, 52(9): 21-25. DOI: 10.14158/j.cnki.1001-3814.20210746
    Abstract PDF
    Research on Laser Welding Technology of 316LN Stainless Steel and Inconel 718 Superalloy Dissimilar Materials
    HUANG Jing, SUN Yufeng, XIN Jijun, NIU Erwu, WEI Jing, DAI Wenhua
    2023, 52(9): 26-30,41. DOI: 10.14158/j.cnki.1001-3814.20203190
    Abstract PDF
    Experimental Study on Interface Diffusion and Tensile Properties of Double-temperature Stage Hot Rolled Mg-Al Laminates
    ZHAO Bowen, ZHOU Cunlong, ZHAO Guanghui, WANG Tao, Zhang Borui
    2023, 52(9): 31-36,41. DOI: 10.14158/j.cnki.1001-3814.20210432
    Abstract PDF
    Welding between TA2/304 Stainless Steel and TA2/T2 Bimetallic Sheets by Laser-Induction Heating Technology
    GAO Yidi, XU Yan, ZHANG Yan
    2023, 52(9): 37-41. DOI: 10.14158/j.cnki.1001-3814.20210557
    Abstract PDF
    Microstructure and Mechanical Properties of Welded Joints of TA17 Ti Alloy by Magnetically Controlled Narrow-Gap TIG Welding
    HU Jinliang, HU Yongjun, ZENG Caiyou, ZHANG Yupeng, DONG Chunlin
    2023, 52(9): 42-46,50. DOI: 10.14158/j.cnki.1001-3814.20210612
    Abstract PDF
    Effect of Heat Input on Microstructure and Mechanical Properties of Laser Self Fluxing Brazed Ti/Al Dissimilar Alloy Joints
    LI Yongmei, CHEN Lihua, WANG Yanlong, REN Yan, ZHAO Hui, WU Xiaoying
    2023, 52(9): 47-50. DOI: 10.14158/j.cnki.1001-3814.20210738
    Abstract PDF
    Study on CMT+P Mix Transition Welding of TA5 Titanium Alloy
    LEI Xiaowei, YU Wei, FU Chengxue
    2023, 52(9): 51-55. DOI: 10.14158/j.cnki.1001-3814.20221877
    Abstract PDF
    Analysis of Effect of Laser Shot Peening on Vibration Fatigue Performance of Dissimilar Stainless Steel Welded Joints
    FU Suning, WU Dean, ZHAO Jing, WANG Yazhou
    2023, 52(9): 56-60,71. DOI: 10.14158/j.cnki.1001-3814.20221428
    Abstract PDF
    Effect of Spot Welding Parameters on Microstructure and Properties of Aluminum/ Steel Dissimilar Metal Welded Joint
    TANG Wei, ZHENG Feng
    2023, 52(9): 61-65,71. DOI: 10.14158/j.cnki.1001-3814.20211383
    Abstract PDF
    Microstructure and Properties of Welded Joints between T23 Tube after Long-term Service and New T91 Tube
    LI Jingang, ZHU Jianqiang, LUAN Gaocan, JING Jiangfeng, XIA Xianxi, ZHANG Xiangqian
    2023, 52(9): 66-71. DOI: 10.14158/j.cnki.1001-3814.20221090
    Abstract PDF
    Simulation Study of Thermal Field of 213 mm Large-diameter Si Crystal Growing by Czochralski Method
    XU Xiaowei, WANG Fei, RAN Ruiying, LI Jun
    2023, 52(9): 72-75. DOI: 10.14158/j.cnki.1001-3814.20210696
    Abstract PDF
    Research on Die Casting Process of AlSi9Cu Aluminum Alloy for Automobile
    ZHANG Dandan, LIU Yongbiao, ZHANG Ronghua
    2023, 52(9): 76-78,75. DOI: 10.14158/j.cnki.1001-3814.20212925
    Abstract PDF
    On-line Real-time Detection of Internal Defects of A356 Aluminum Alloy Wheel Hub
    ZHANG Junsheng, HE Yingfeng, YANG Peng, TONG Xiaogang
    2023, 52(9): 79-82,87. DOI: 10.14158/j.cnki.1001-3814.20222052
    Abstract PDF
    Optimization of Cooling Process Parameters of An Aluminum Alloy Steering Knuckle Differential Pressure Casting
    LI Zhi, CHEN Zhen, ZHANG Jian
    2023, 52(9): 83-87. DOI: 10.14158/j.cnki.1001-3814.20212784
    Abstract PDF
    Influence of Squeeze Casting Pressure on Properties of A356 Aluminum Alloy for Automobile
    CAO Yuemei, JIANG Xueru, ZHAO Hailiang
    2023, 52(9): 88-91. DOI: 10.14158/j.cnki.1001-3814.20211722
    Abstract PDF
    Effect of Thermal Deformation on Hydrogen Embrittlement of 430 Ferritic Stainless Steel
    WANG Tao, XIAO Wentao, KONG Qingwei, LIANG Wei
    2023, 52(9): 92-94. DOI: 10.14158/j.cnki.1001-3814.20210619
    Abstract PDF
    Effect of Hot Rolling Lubrication on Surface State of IF Steel
    WANG Chang, YU Yang, GUAN Jiandong, WANG Lin, GAO Xiaoli, CHEN Jin
    2023, 52(9): 95-97,102. DOI: 10.14158/j.cnki.1001-3814.20210255
    Abstract PDF
    Effect of Built-In Magnetorheological Elastomer Support on Deep Drawing Forming Properties of AZ31 Magnesium Alloy
    FU Zemin, DAI Yipeng, LIU Xuhui, FU Changhua, GAN Xin
    2023, 52(9): 98-102. DOI: 10.14158/j.cnki.1001-3814.20213518
    Abstract PDF
    Hot Forging Process Optimization of Gear Shaft Based on RBF Neural Network
    CHAO Shujuan, WEI Liya
    2023, 52(9): 103-105,110. DOI: 10.14158/j.cnki.1001-3814.20212368
    Abstract PDF
    Study on Dimensional Accuracy of Incremental Forming of TC4 Ti Alloy Sheet by Electromagnetic Induction Heating
    YE Zhuang, WANG Hui, WU Tianli, GUANG Kaihui
    2023, 52(9): 106-110. DOI: 10.14158/j.cnki.1001-3814.20210713
    Abstract PDF
    Process Optimization of 7050/2524 Aluminum Alloy Refill Friction Stir Spot Welding
    CHEN Dan, DOU Jianxin, ZHANG Haonan, LI Jinglong
    2023, 52(9): 111-114. DOI: 10.14158/j.cnki.1001-3814.20211054
    Abstract PDF
    Research on Auto-Welding of Canopy Seal Ring of Canned Reactor Coolant Pump
    YAN Guohua, CHEN Shu, ZHANG Ji, SHI Guolong, TAO Zeyong
    2023, 52(9): 115-117,114. DOI: 10.14158/j.cnki.1001-3814.20222130
    Abstract PDF
    Stress and Strain Analysis of Crack Tip of 2A12-T4 Aluminum Alloy Friction Stir Welded Joint
    WANG Lei, YANG Bing, AN Jinlan, CONG Jiahui, ZHOU Song
    2023, 52(9): 118-122,129. DOI: 10.14158/j.cnki.1001-3814.20202122
    Abstract PDF
    Study on Galvanic Corrosion Behavior of Steel/Aluminum Laser-MIG Hybrid Welding-Brazing Joints
    YANG Hongwei, WANG Xin, FU Hao, LIU Ruilin, ZHU Zongtao
    2023, 52(9): 123-129. DOI: 10.14158/j.cnki.1001-3814.20221696
    Abstract PDF
    Effect of Current Parameters on Arc Striking and Spatter of Steel and Aluminum Wires during Percussive Welding
    LI Maosheng, HUANG Zenghao, PANG Shixuan, LU Shenglei
    2023, 52(9): 130-135. DOI: 10.14158/j.cnki.1001-3814.20222084
    Abstract PDF
    Study on Application of Key Hole TIG Welding Technology in Medium and Large Thick TA2 Plate
    YIN Yayun, LEI Xiaowei, WANG Haideng, CUI Yongjie, FU Zhanbo
    2023, 52(9): 136-139. DOI: 10.14158/j.cnki.1001-3814.20212196
    Abstract PDF
    Research on Welding Technology between Channel Head Nozzle and Safe End of Steam Generator
    CUI Fan, ZHU Bo, ZHANG Jifeng, DENG Yi
    2023, 52(9): 140-143. DOI: 10.14158/j.cnki.1001-3814.20210678
    Abstract PDF
    Study on High Temperature Fatigue Performance of Laser Wire Filling Butt Welding Joint of 1.2 mm Thick TC4 Titanium Alloy Sheet
    WANG Bo, BU Yanqiang
    2023, 52(9): 144-147. DOI: 10.14158/j.cnki.1001-3814.20221360
    Abstract PDF
    Research on Domestic Application of High Temperature Brazing Filter Material and Flux for Motor Rotor Brazing
    XIE Guisheng, WU Yuan, QI Ying, SHI Xinghua, LIU Mengge
    2023, 52(9): 148-150. DOI: 10.14158/j.cnki.1001-3814.20221375
    Abstract PDF
    Cracking Failure Analysis of Cr-Mo-V Series Hot Stamping Die Insert for Automobile
    JIANG Bin, JI Jie, HE Xijuan, ZUO Pengpeng, WU Xiaochun
    2023, 52(9): 151-156. DOI: 10.14158/j.cnki.1001-3814.20210817
    Abstract PDF
    Cause of Corrosion Perforation on Inner Wall of Φ108 mm×5 mm Sewage Pipeline Weld
    WANG Donglin, KONG Xiangdong, ZHANG Jia'ning, CAI Bin, WANG Zhipeng, YU Guomin
    2023, 52(9): 157-159,162. DOI: 10.14158/j.cnki.1001-3814.20210674
    Abstract PDF
    Failure Analysis on Cracking of Aluminum-Silicon Alloy Shell
    YAN Fuhua, YUAN Man, QI Chen, LI Ning, ZHOU Fan, ZHOU Qian, ZHAO Jiaoyu
    2023, 52(9): 160-162. DOI: 10.14158/j.cnki.1001-3814.20220982
    Abstract PDF
    Email Alert RSS