column
    Research Progress on Silicon Phase Refinement in Hypereutectic Al-Si Alloys
    DONG Tianshun, MA Qingliang, FU Binguo, LI Jingkun, LI Guolu, LU Pengwei
    2024, 53(3): 1-6,13. DOI: 10.14158/j.cnki.1001-3814.20221316
    Abstract PDF
    Research Progress of Friction Stir Welding of Aluminum Alloy
    ZOU Yang, WEI Wei, FAN Yue, WANG Zezhen, WANG Qiang, ZHAO Liang
    2024, 53(3): 7-13. DOI: 10.14158/j.cnki.1001-3814.20213578
    Abstract PDF
    Effect of Hatch Spacing on Density of AlSi10Mg Alloy Fabricated by Selective Laser Melting
    SHEN Chuan, ZHANG Qiaoxin, YU Jingui, LIU Rong
    2024, 53(3): 14-18. DOI: 10.14158/j.cnki.1001-3814.20212851
    Abstract PDF
    Microstructure and Mechanical Properties of 6082 Aluminum Alloy Refill Friction Stir Spot Welding Butt Joint
    LIU Yinghui, YANG Deyun
    2024, 53(3): 19-23,28. DOI: 10.14158/j.cnki.1001-3814.20213505
    Abstract PDF
    Study on Multi-Zone Mechanical Properties of Friction Stir Weld of 5083 Aluminum Alloy
    WANG Lei, ZENG Hongrun, LIU Xiaopeng, HUI Li, CONG Jiahui
    2024, 53(3): 24-28. DOI: 10.14158/j.cnki.1001-3814.20212753
    Abstract PDF
    Research on Measurement Method of Welding Inherent Strain Based on Computer Vision
    GOU Zhonglin, LUO Yu, YUAN Yuchao
    2024, 53(3): 29-32. DOI: 10.14158/j.cnki.1001-3814.20213068
    Abstract PDF
    Study on Mechanical Properties and Strengthening Mechanism of 5356 Aluminum Alloy Thin-walled Parts Prepared by CMT Arc Additive Manufacturing
    ZHOU Luqi, ZHU Xiaolei, LU Xiaofeng, WANG Jian
    2024, 53(3): 33-38,42. DOI: 10.14158/j.cnki.1001-3814.20213609
    Abstract PDF
    Study on Influence of AgCuInTi Solder on Strength of YG16 Cemented Carbide/Steel Joint
    ZHANG Suhui, WANG Shiqing, DAI Yongbo, WEN Guodong, LUO Xiaowei
    2024, 53(3): 39-42. DOI: 10.14158/j.cnki.1001-3814.20212636
    Abstract PDF
    Non-equal Strength Repair on Surface of Damping Oil Seal Area of A Large-Sized Shaft by Silver Brazing
    YANG Chunyan, SUN Dongpo, LEI Ruixiang, SHI Wei, YANG Fei
    2024, 53(3): 43-47,52. DOI: 10.14158/j.cnki.1001-3814.20212867
    Abstract PDF
    Microstructure and Temperature Distribution of 6082 Aluminum Alloy Friction Plug Repair Welding Joint by Shoulder Auxiliary Heating
    LI Defu, WANG Xijing, ZHAO Zaolong
    2024, 53(3): 48-52. DOI: 10.14158/j.cnki.1001-3814.20213086
    Abstract PDF
    Microstructure and Mechanical Properties of Q690D GMAW Multi-Pass Welding Joint
    LIU Wubing, WANG Shiqing, LI Fangpo
    2024, 53(3): 53-56,61. DOI: 10.14158/j.cnki.1001-3814.20212719
    Abstract PDF
    Research on Effect of Cu on Microstructure of Interface Area of Aluminum/Steel CMT Welding-brazing Joint
    JIA Jianping, LI Tianyu, ZHAN Zhiping, JIANG Ximing
    2024, 53(3): 57-61. DOI: 10.14158/j.cnki.1001-3814.20212905
    Abstract PDF
    Design of Vision System for Recognition and Tracking of Fillet Welds of Fan Blade
    WANG Haodong, HAN Jianhai, WANG Junhua, LIU Jipeng
    2024, 53(3): 62-67. DOI: 10.14158/j.cnki.1001-3814.20211990
    Abstract PDF
    Effect of Heat Treatment on Properties of Ultra-Low Carbon CrMnN Austenitic Stainless Steel Welded Joints
    WANG Weidong, WANG Haitao, WANG Liang, WANG Weiliang, XIAN Linyun, GUO Kexing, FANG Shichao
    2024, 53(3): 68-70,76. DOI: 10.14158/j.cnki.1001-3814.20212895
    Abstract PDF
    Optimization of Process Parameters and Analysis of Microstructure Characteristics of Al/Mg Dissimilar Materials Friction Stir Welding
    LU Yaowen, ZHAO Yadong, CUI Hongbao
    2024, 53(3): 71-76. DOI: 10.14158/j.cnki.1001-3814.20213192
    Abstract PDF
    Study on Eliminating Hook Defect of Lap Joint by Double-Side Friction Stir Welding
    WANG Ren, LIU Xuesong
    2024, 53(3): 77-81. DOI: 10.14158/j.cnki.1001-3814.20213613
    Abstract PDF
    Research on Resistance Spot Welding Process Window and Spot Welding Consistency of DH590 Cold Rolled Sheet and Its Galvanized Sheet
    LU Yue, NIU Yuepeng, PAN Jin, MA Cheng, SUN Li, WANG Lianxuan, ZHANG Longzhu
    2024, 53(3): 82-87. DOI: 10.14158/j.cnki.1001-3814.20212550
    Abstract PDF
    Texture Evolution after Annealing of TA1 Titanium Sheet Rolled by Corrugated Roll
    LIU Xinyang, ZHANG Mengfei, LI Sha, ZHANG Changjiang, HAN Jianchao
    2024, 53(3): 88-94. DOI: 10.14158/j.cnki.1001-3814.20220123
    Abstract PDF
    Effects of Rolling Process on Microstructure and Properties of Mg-Gd-0.75Er-0.5Zn-0.18Zr Magnesium Alloy
    CHENG Rongxin, ZHANG Jing, ZANG Qianhao, HAN Dong, FENG Di, CUI Hongwei, CHEN Hongmei
    2024, 53(3): 95-99. DOI: 10.14158/j.cnki.1001-3814.20220461
    Abstract PDF
    Research on Orthogonal Optimization of Ball Spinning Process Parameters of AISI-304 Stainless Steel Thin-walled Tube
    ZHANG Jinfeng, YAN Bijuan, ZHAO Chunjiang, XU Yiwei, BIAN Qiang
    2024, 53(3): 100-104. DOI: 10.14158/j.cnki.1001-3814.20222032
    Abstract PDF
    Research on Microstructure and Mechanical Properties of AZ31B Magnesium Alloy Formed by Differential Temperature Shear Spinning
    QIN Linxin, YANG Wenhua, HAO Aiguo, CUI Xuchang, WANG Fenghua, DONG Jie
    2024, 53(3): 105-109,113. DOI: 10.14158/j.cnki.1001-3814.20212890
    Abstract PDF
    Microstructure and Mechanical Properties of AZ31 Magnesium Alloy Sheet during Bending and Straightening at Room Temperature
    TIAN Jing, DENG Jiafei, CHANG Yuanying, LIANG Wei
    2024, 53(3): 110-113. DOI: 10.14158/j.cnki.1001-3814.20212392
    Abstract PDF
    Effects of Withdrawal Rate on Microstructure and Segregation Behavior of Directionally Solidified Column Crystal DZ4125 Superalloy
    ZHANG Xianglong, XU Mang, GENG Xiaoqi, LIU Guohuai, WANG Ye, WANG Zhaodong, GUO Jingjie
    2024, 53(3): 114-118,123. DOI: 10.14158/j.cnki.1001-3814.20212465
    Abstract PDF
    Process Optimization of Low-Pressure Die Casting of Aluminum Alloy Reduction Gears Shell Based on Orthogonal Test
    WU Qiqi, SU Xiaoping, YANG Chuang, ZHOU Dashuang, KANG Zhengyang
    2024, 53(3): 119-123. DOI: 10.14158/j.cnki.1001-3814.20212501
    Abstract PDF
    Study on Improving High-temperature Creep Property of ZM3 Alloy
    LI Yiguo
    2024, 53(3): 124-128. DOI: 10.14158/j.cnki.1001-3814.20212791
    Abstract PDF
    Optimization of Low Pressure Casting Process Parameters for A356 Aluminum Alloy Sleeve
    CHEN Ziye, SU Xiaoping, KANG Zhengyang
    2024, 53(3): 129-134. DOI: 10.14158/j.cnki.1001-3814.20212305
    Abstract PDF
    Effect of Adding Carbon Powder on Microstructure and Mechanical Properties of AZ91 Magnesium Alloy
    WANG Dianjun, HU Maoliang, ZHANG Mingqiu, WANG Hongying, ZHANG Jisheng, GAO Enda
    2024, 53(3): 135-139,144. DOI: 10.14158/j.cnki.1001-3814.20213010
    Abstract PDF
    Optimization for Low-Pressure Casting Parameters of A356 Aluminum Alloy Steering Valve Shell Based on Response Surface Method
    TAO Jian, SU Xiaoping, KANG Zhengyang
    2024, 53(3): 140-144. DOI: 10.14158/j.cnki.1001-3814.20212002
    Abstract PDF
    Cause Analysis and Inspection Method of TC17 Titanium Alloy Integral Blisk Blade Defects
    LIU Liyu, GAO Xiangyu, LIU Rong, MENG Qingtong
    2024, 53(3): 145-149. DOI: 10.14158/j.cnki.1001-3814.20212920
    Abstract PDF
    Die-casting Process Design and Numerical Simulation Optimization of Aluminum Alloy Gearbox Rear Shell
    ZHAO Fei, SU Xiaoping, ZHOU Dashuang, YANG Chuang
    2024, 53(3): 150-153,158. DOI: 10.14158/j.cnki.1001-3814.20212886
    Abstract PDF
    Analysis of Internal Surface Defects of Seamless Steel Tubes
    LIU Tongtong, MO Wenling, ZHANG Qingjun, MENG Lingfa
    2024, 53(3): 154-158. DOI: 10.14158/j.cnki.1001-3814.20212155
    Abstract PDF
    Email Alert RSS