column
    Analysis on Development Trend of Superalloy Technology Based on High Value Patents
    LI Dan, ZHANG Wenhui, WANG Wei, TANG Heng
    2025, 54(17): 1-10. DOI: 10.14158/j.cnki.1001-3814.20240595
    Abstract PDF
    Formation Mechanism and Simulation Analysis Progress of Pore Defects in Additive Manufacturing of Aluminum Alloys
    ZHUO Shuai, LU Xuecheng, ZHANG Zhiqiang, YAN Junpei, DONG Yueze
    2025, 54(17): 11-17,22. DOI: 10.14158/j.cnki.1001-3814.20232201
    Abstract PDF
    Research Progress on Laser Surface Modification Technology of NiTi Alloy
    CHEN Hui, SONG Jie, QIU An, ZHOU Guanghong
    2025, 54(17): 18-22. DOI: 10.14158/j.cnki.1001-3814.20222449
    Abstract PDF
    Interfacial Microstructural Characteristics and Mechanical Properties of Deposition Layer/Substrate of Marine Steel Component Fabricated by Submerged Arc Additive Manufacturing
    ZHANG Zhiqiang, YANG Cheng, YU Yang, HUANG Henan, LIU Tie, WANG Jiaji, HU Fengya, LIU Jin
    2025, 54(17): 23-30. DOI: 10.14158/j.cnki.1001-3814.20241416
    Abstract PDF
    Effect of Laser Shot Peening on Wear Resistance of 21-4N Valve Steel
    QI Yixin, CHENG Jun, WANG Junwei, WANG Yongjian, DAI Leyang, SHENG Chenxing
    2025, 54(17): 31-37. DOI: 10.14158/j.cnki.1001-3814.20231995
    Abstract PDF
    Study on Repairing of H13 Ultra High Strength Steel Hot Stamping Mold by Homogenization Laser Cladding Technology
    JIANG Bo, SUN Fuzhen
    2025, 54(17): 38-44. DOI: 10.14158/j.cnki.1001-3814.20240078
    Abstract PDF
    Effects of Different Silicon Content and Flow Inoculants on Microstructure and Properties of High Silica Solution Ductile Iron
    WU Yanyi, ZHANG Jiantao, LIU Guobing, XU De'an, QIN Man, LI Xingyi, LIN Zhengqi, XIAO Zhiyu
    2025, 54(17): 45-50,57. DOI: 10.14158/j.cnki.1001-3814.20241273
    Abstract PDF
    Effects of Post-welding Milling on CGHAZ Microstructure and Properties of X80 Steel Welded Joints
    WANG Gang, CAO Jianghai, XUE Haoyue, WANG Jingwen, YAO Zongxiang, YIN Limeng
    2025, 54(17): 51-57. DOI: 10.14158/j.cnki.1001-3814.20241392
    Abstract PDF
    Effects of Content of Ti-C-Al Preform on Microstructure and Friction and Wear Properties of TiC/AZ91D Magnesium Matrix Composites
    LI Shengyuan, LI Xiulan, ZHOU Liyu, WANG Kaiqiang, YANG Xin
    2025, 54(17): 58-63. DOI: 10.14158/j.cnki.1001-3814.20222733
    Abstract PDF
    Effect of Pulse Parameters on Droplet Transfer and Weld Formation in MIG Welding of 6061 Aluminum Alloy
    LI Zhiyong, WANG Xueli, LI Peng, ZHANG Jie, WANG Shilu, ZHANG Guangxian
    2025, 54(17): 64-68,73. DOI: 10.14158/j.cnki.1001-3814.20232905
    Abstract PDF
    Effects of Quenching and Tempering Treatment on Corrosion Resistance and Mechanical Properties of Hot Rolled Composite Plate
    WANG Quanquan, CAO Wei, QI Hao, WU Hao, LIN Zhenghan, LI Luyan, DING Yi
    2025, 54(17): 69-73. DOI: 10.14158/j.cnki.1001-3814.20222517
    Abstract PDF
    Study on Microstructure and Mechanical Properties of Aluminum/Copper Ultrasonic Welded Joints
    DENG Jianxiong, TANG Zhengqiang, ZHAO Lun, ZESHAN Abbas, YAN Zhuocheng
    2025, 54(17): 74-78. DOI: 10.14158/j.cnki.1001-3814.20232001
    Abstract PDF
    Study on Microstructure and Properties of Automatic Welding Joint of X80 Steel Pipeline
    CUI Chengwu, GAO Yanan, LYU Zhenbo, YAN Xinyu, WANG Junhong
    2025, 54(17): 79-83. DOI: 10.14158/j.cnki.1001-3814.20233020
    Abstract PDF
    Preparation and Properties of Zr, Sr, RE Modified Aluminum Alloy Fittings Materials
    ZHAO Jing, LI Shengfang, CHEN Wei, WANG Qian, YANG Hui, GONG Liang, ZENG Lang, MU Yingxiu, HUANG Ruwei, CAO Xianlong
    2025, 54(17): 84-90. DOI: 10.14158/j.cnki.1001-3814.20240223
    Abstract PDF
    Study on Friction and Wear Behavior of Graphene Reinforced CuW Composites
    MIAO Xiaojun, FAN Yanyan, ZHANG Qiao, HAO Liucheng, LI Kai, CHEN Zheng
    2025, 54(17): 91-96. DOI: 10.14158/j.cnki.1001-3814.20232094
    Abstract PDF
    Effect of Capsule Material on Microstructure of TiAl-4522XD Alloy/Capsule Interface after Hot Isostatic Pressing
    YANG Chao, CHANG Tao, ZHANG Guodong, WANG Yongzhe, TANG Hongkui, QU Zonghong
    2025, 54(17): 97-101. DOI: 10.14158/j.cnki.1001-3814.20231909
    Abstract PDF
    Research on Partitioning Heat Treatment Process of Si-Mn Alloy Steel
    GU Jian, LIU Shengchun, SI Jiajun, WANG Xinxin
    2025, 54(17): 102-107. DOI: 10.14158/j.cnki.1001-3814.20232640
    Abstract PDF
    Effects of Fiber Laser Process Parameters on Dimensions of Single-track Laser Wire Deposited Layer
    WANG Rui, HAN Hongbiao, ZHENG Guangzhen, ZHANG Peng
    2025, 54(17): 108-112. DOI: 10.14158/j.cnki.1001-3814.20231947
    Abstract PDF
    Corrosion Rate and Service Life Prediction of CO2 Injection Well String
    FENG Fuping, YOU Guiyang, ZHANG Xiaochuan, WANG Jingqin, WANG Qingduo, CAO Jing, HAN Xu
    2025, 54(17): 113-118,123. DOI: 10.14158/j.cnki.1001-3814.20240138
    Abstract PDF
    Evolution of Microstructure and Mechanical Properties of Ni/Al Composites during ARB
    ZHAO Yingjun, CUI Yan, WANG Tao, YU Kun
    2025, 54(17): 119-123. DOI: 10.14158/j.cnki.1001-3814.20222909
    Abstract PDF
    Effect of Simulated Hot Rolling Parameters on Microstructure of Non-annealing 10B21 Cold Heading Steel
    WANG Jintao, YU Xuesen, LI Zhanwei, ZHANG Yu
    2025, 54(17): 124-127,132. DOI: 10.14158/j.cnki.1001-3814.20223231
    Abstract PDF
    Effects of Heat Treatment Process on Microstructure and Properties of High Precision KFC Special-shaped Copper Strip Produced by Forging and Rolling Method
    HAN Zhenbin, ZHAO Zhao, YU Guojun, LIU Dong, LIU Jianbin, WANG Hongling, WEI Wei
    2025, 54(17): 128-132. DOI: 10.14158/j.cnki.1001-3814.20222399
    Abstract PDF
    Microstructure and Mechanical Properties of Mg-6Zn-1Y-0.6Ca Alloy at Different Rolling Temperatures
    ZHANG Yalin, LIU Yonghui, QIU Hui
    2025, 54(17): 133-135,143. DOI: 10.14158/j.cnki.1001-3814.20221531
    Abstract PDF
    Effect of Annealing on Microstructure and Hardness of As-cast High Ni-rich NiTi Alloys
    CAO Guoqing, YUAN Tianya, YANG Yanxiang, WEN Yuhua
    2025, 54(17): 136-143. DOI: 10.14158/j.cnki.1001-3814.20231468
    Abstract PDF
    Effect of Low Pressure Casting Pressure and Cooling Speed on Microstructure and Properties of AlSi7Mg Aluminum Alloy
    WEN Renxing, XIE Yanmin
    2025, 54(17): 144-146,152. DOI: 10.14158/j.cnki.1001-3814.20220240
    Abstract PDF
    Effects of Composition and Heat Treatment Process on Microstructure and Hardness of 00Cr12Ni9Mo4Cu2TiAl Steel
    XU Zizhen, ZHAO Yingli, REN Shuai, SUN Zhiyan, ZHANG Zhiwang
    2025, 54(17): 147-152. DOI: 10.14158/j.cnki.1001-3814.20222253
    Abstract PDF
    Failure Analysis of Low Pressure Exploded TC4 Titanium Tank
    LI Sibei, ZHENG Zhangxian, SONG Fan, HUANG Lina, ZHU Mingde
    2025, 54(17): 153-155. DOI: 10.14158/j.cnki.1001-3814.20222762
    Abstract PDF
    Effects of Reaction Temperature and Time on Preparation of Al3Ti/Al Matrix Composites by In-situ Reaction
    LI Jiale, NIU Libin, CHANG Yonggang, CHEN Longfang, ZHANG Hao
    2025, 54(17): 156-160. DOI: 10.14158/j.cnki.1001-3814.24013392
    Abstract PDF
    Study on Electroless Copper Plating on Magnesium Alloy MAO Layer Prepared by Tetrahydroxypropyl Ethylenediamine （THPED）/Sodium Citrate Dual Complexation System
    CHAO Shengyuan, CHEN Yuan
    2025, 54(17): 161-166,173. DOI: 10.14158/j.cnki.1001-3814.20240409
    Abstract PDF
    Research Progress on Modification of Gel Electrolyte for Aqueous Zinc Ion Batteries
    FENG Yuxuan, YAN Yinglin
    2025, 54(17): 167-173. DOI: 10.14158/j.cnki.1001-3814.250068
    Abstract PDF
    Influence of Preheat Exposure on High Temperature Creep Resistance at 700-800 ℃ and Fracture Mechanisms of Ti2AlNb Alloy
    CHEN Yuhao, ZHONG Shilin, DENG Yuanhao, TAN Haibing, WU Chen, WANG Liangliang, ZHONG Yan, TIAN Wei
    2025, 54(17): 174-183. DOI: 10.14158/j.cnki.1001-3814.25020005
    Abstract PDF
    Microstructure Control and Wear, Corrosion Resistance of Laser Cladding FeCo0.5CrNi1.5B0.5Nb0.1High Entropy Alloy Coating
    ZHANG Guosong, WANG Wenchao, LIU Tao, CHEN Bing, ZHANG Zongjia
    2025, 54(17): 184-189. DOI: 10.14158/j.cnki.1001-3814.20223539
    Abstract PDF
    Investigation on Temperature Field Characteristics and Defect Prediction of Flywheel Casting Process Based on Numerical Simulation
    WU Zhaoyang, XIE Zhanshan
    2025, 54(17): 190-194,200. DOI: 10.14158/j.cnki.1001-3814.20223607
    Abstract PDF
    Effects of Plasma Gas Flow on Microstructure and Wear Resistance of Fe-Cr-B-C Alloy Coating
    LI Ting, CHEN Dong, WANG Zhiyuan, XIONG Fanqi, LU Jing
    2025, 54(17): 195-200. DOI: 10.14158/j.cnki.1001-3814.20223178
    Abstract PDF
    Preparation and Conductivity Properties Study of Nitrogen Stoichiometric TiCrN Coating
    LI Lin, LOU Meiqi, ZHAO Xiaohua, DU Junqi, SUN Feng
    2025, 54(17): 201-205. DOI: 10.14158/j.cnki.1001-3814.20223260
    Abstract PDF
    Study on Process of Casting Defects Improvement of Tin-based Alloy Thrust Bearing
    NAN Feiyan, ZHOU Lin, ZHOU Qian, XUE Fei
    2025, 54(17): 206-210. DOI: 10.14158/j.cnki.1001-3814.25070128
    Abstract PDF
    Email Alert RSS