column
    Progress in Preparation and Performance Optimization of Copper/Aluminum Bimetallic Composite
    LI Cong, WANG Yuze, LI Haijun, ZOU Changfang, CAO Binbin, LIU Chang, SHA Haoran, ZUO Lijie
    2025, 54(23): 1-8,16. DOI: 10.14158/j.cnki.1001-3814.20232875
    Abstract PDF
    Research Progress in Microbial Corrosion of Metallic Materials
    FU Lei, HUANG Xingjie, LIN Li, WANG Zhengguo, YAN Shisen, TAN Mingxing, MU Jieshuang, GUAN Yanbing
    2025, 54(23): 9-16. DOI: 10.14158/j.cnki.1001-3814.20221951
    Abstract PDF
    Research Progress of Inclusions and Segregation Control in Bearing Steel Slab
    LIANG Jiaojiao, FANG Qi
    2025, 54(23): 17-23. DOI: 10.14158/j.cnki.1001-3814.20241314
    Abstract PDF
    Research Status of Preparation and Optimization Methods of Cu2Te-based Thermoelectric Materials
    LI Ye, WANG Xiaohuan, XIA Yangyang
    2025, 54(23): 24-31. DOI: 10.14158/j.cnki.1001-3814.20232657
    Abstract PDF
    Effects of Austenization Temperature on Microstructure and Wear Properties of Low Alloy Wear-resistant Steel
    WAN Xin, SONG Xinli, JIA Juan, PAN Ziqin, GE Rui
    2025, 54(23): 32-38. DOI: 10.14158/j.cnki.1001-3814.20223419
    Abstract PDF
    Effects of Thermal Aging on Microstructure Evolution and Residual Stress of GCr15 Steel High Precision Linear Guide
    LI Chao, JIANG Fengyang, WANG Junbo, SHI Yingjian, SI Fang, CUI Gang, WANG Qian
    2025, 54(23): 39-43. DOI: 10.14158/j.cnki.1001-3814.20223007
    Abstract PDF
    Influence of Heat Treatment on Removable Partial Cast Dental Stent
    LIU Jianing, NIU Xinhui, ZHAO Xingchuan, LIU Yikang, REN Shiqiang
    2025, 54(23): 44-48. DOI: 10.14158/j.cnki.1001-3814.20223257
    Abstract PDF
    Effect of Different Heat Treatment Orders on Mechanical Properties of Aluminum-Steel Transition Joints
    LI Jun, HAN Gang, JIANG Xiaobo, ZHAI Weiguo, ZHANG Baoqi
    2025, 54(23): 49-52. DOI: 10.14158/j.cnki.1001-3814.20222942
    Abstract PDF
    Research and Application of Temperature Forecast Model for Medium and Thick Plate Heat Treatment Furnace
    WANG Pingzai, LI Jiadong, LI Yong
    2025, 54(23): 53-57. DOI: 10.14158/j.cnki.1001-3814.20223507
    Abstract PDF
    Study on Corrosion Behavior of 310S Stainless Steel in Molten Chloride Salt
    MENG Qian, RAO Wan, LI Dongyang, LIU Tianzeng, LA Peiqing
    2025, 54(23): 58-67. DOI: 10.14158/j.cnki.1001-3814.20232813
    Abstract PDF
    Preparation of Carbon Nanotube Reinforced Hollow Microlattice Materials and Its Compression Properties
    LYU Xinying, LIU Longquan, SHI Jianhang
    2025, 54(23): 68-74. DOI: 10.14158/j.cnki.1001-3814.20223609
    Abstract PDF
    Microstructure and Properties of FeCrMnCuNiSi1 High Entropy Core Wire Coating by Tungsten Electrode Arc Melting
    SHAN Xinghai, CONG Mengqi, LEI Weining
    2025, 54(23): 75-81. DOI: 10.14158/j.cnki.1001-3814.20222001
    Abstract PDF
    Droplet Transition and Weld Formation of 2A12 Aluminum Alloy by AC ASMT Welding
    LI Peng, WANG Shilu, LI Zhiyong, WANG Xueli, ZHANG Hanbo, YANG Lijun
    2025, 54(23): 82-89. DOI: 10.14158/j.cnki.1001-3814.25021088
    Abstract PDF
    Process Optimization of Ultrasonic Rolling Treatment for G20Cr2Ni4A Bearing Race
    ZHU Xiaotong, PAN Jinzhi, LIU Pengtao, CHENG Zhi, REN Ruiming
    2025, 54(23): 90-96. DOI: 10.14158/j.cnki.1001-3814.20223521
    Abstract PDF
    Study on High Temperature Tensile Microstructure and Properties of TC11 Titanium Alloy
    ZHANG Mingyu, ZHANG Tianwei, YUE Xu
    2025, 54(23): 97-101. DOI: 10.14158/j.cnki.1001-3814.20240132
    Abstract PDF
    Effects of Layer Thickness Ratio on Microstructure and Mechanical Properties of Al2O3-ZrB2/Al2O3-TiCN Laminated Ceramics
    MENG Weiqi, GAO Jiaojiao, LIU Jiabao, HU Shiheng, WANG Yao, SONG Jinpeng
    2025, 54(23): 102-106,112. DOI: 10.14158/j.cnki.1001-3814.20223366
    Abstract PDF
    Microstructure and Tensile-shear Property of Polyimide/Al Alloy FSSW Joint
    ZHU Shanqing, WEI Yihan, LEI Chiyu, HAN Mengjie, GAO Jicheng
    2025, 54(23): 107-112. DOI: 10.14158/j.cnki.1001-3814.20222903
    Abstract PDF
    Corrosion Behavior of 2A12 Aluminum Alloy in Ultra-deep Well Environment
    WU Xinyuan, HUANG Yang, LI Xiulan, TIAN Xiaoyong, JIANG Benqiang
    2025, 54(23): 113-118,125. DOI: 10.14158/j.cnki.1001-3814.20240858
    Abstract PDF
    Experimental Research and Application of Welding of SA516GR70/SA240TP304 Composite
    CHEN Xujiang, YU Hongxu, YANG Linjie
    2025, 54(23): 119-125. DOI: 10.14158/j.cnki.1001-3814.20241713
    Abstract PDF
    Study on Three-body Wear Performance of High Chromium Cast Iron Composite Reinforced by ZTA Ceramic
    HU Jian, LU Ningbin, ZHANG Zongxiang, QI Xia, WANG Yong
    2025, 54(23): 126-131. DOI: 10.14158/j.cnki.1001-3814.25100121
    Abstract PDF
    Numerical Prediction of Welding Deformations in Steel Bridge Deck Based on Inherent Strain
    TIAN Liang, LIU Lei, ZHAO Jian, FAN Lilong, XU Zheng
    2025, 54(23): 132-137,144. DOI: 10.14158/j.cnki.1001-3814.20240909
    Abstract PDF
    Research on Dynamic Process of Pulse Plasma Arc Lap Joint Welding of 1.2 mm Thick 304L Stainless Steel Thin Plates
    LU Jingyi, HE Jianping, LI Fang
    2025, 54(23): 138-144. DOI: 10.14158/j.cnki.1001-3814.20240478
    Abstract PDF
    Research on Adaptive Intelligent Welding Technology of Argon Arc Welding Robot for Stainless Steel Petrochemical Pipeline
    FAN Yunbo, YAN Wenrong, XU Yanhong, ZHANG Xinming, BAO Liangliang
    2025, 54(23): 145-149,154. DOI: 10.14158/j.cnki.1001-3814.20231749
    Abstract PDF
    Comparison of Surface Quality and Properties of 304 Austenitic Stainless Steel Tubes in Different Hot Working Processes
    WANG Hairui, WANG Jinyong, FEI Zhiwei
    2025, 54(23): 150-154. DOI: 10.14158/j.cnki.1001-3814.20230012
    Abstract PDF
    Study on Microstructure of Ultrasonic-assisted Brazed Repair Joints of Aluminum Alloy
    REN Shouwei, WEN Quan, WU Xuemeng, LI Zhengwei, YAN Huawei
    2025, 54(23): 155-159. DOI: 10.14158/j.cnki.1001-3814.20230146
    Abstract PDF
    Study on Effect of Inclusions Evolution on Toughness of Heat Affected Zone of AH36 Steel for High Heat Input Welding
    ZHAO Lidong, ZHAO Heming, LI Weijuan, YU Hao, WANG Dihe, BAI Rui, PANG Qihang
    2025, 54(23): 160-166. DOI: 10.14158/j.cnki.1001-3814.20241413
    Abstract PDF
    Study on High Ductility Extra Thick Plate Rolled with Low Compression Ratio by Continuous Casting Blank with Big Reduction
    WEI Yunfei, KANG Yonglin, XIE Cuihong, WANG Dongzhu, SHEN Kaizhao, XU Haiwei, DI Guobiao, MA Guojin
    2025, 54(23): 167-171,179. DOI: 10.14158/j.cnki.1001-3814.20222163
    Abstract PDF
    Application of DOE in Improving Mechanical Properties of Nuclear-grade Cast Iron Alloys
    ZHANG Chao
    2025, 54(23): 172-179. DOI: 10.14158/j.cnki.1001-3814.20240892
    Abstract PDF
    Effect of Direct Quenching+Tempering and Cr Content on Cu Precipitation-strengthened Steel
    QIAN Jiang, LI Tong, LIU Jian, WEI Xinghao
    2025, 54(23): 180-185,197. DOI: 10.14158/j.cnki.1001-3814.25100047
    Abstract PDF
    Effects of Heat Treatment on Microstructure and Properties of Al0.2CrNbTiV Refractory High Entropy Alloy Coating Deposited by Ultra High Speed Laser Cladding
    JIAN Ligang, LIU Xiucheng, LIU Yi, WANG Wei, CHEN Tianhui, LI Chengxin
    2025, 54(23): 186-197. DOI: 10.14158/j.cnki.1001-3814.20240764
    Abstract PDF
    Analysis on Microstructure and Mechanical Properties of Copper/Steel Bimetallic Metals Diffusion Bonded Joints
    LU Yayun, JI Shuwei, DU Peng, WU Yong, WANG Rongxiang, LU Yueliang
    2025, 54(23): 198-203. DOI: 10.14158/j.cnki.1001-3814.20241905
    Abstract PDF
    Failure Analysis on Cracking of Natural Gas Transmission Bend Pipe
    DONG Zhiqiang, JIAN Zhenghao, YANG Yong, ZHANG Jianxun
    2025, 54(23): 204-207. DOI: 10.14158/j.cnki.1001-3814.20230025
    Abstract PDF
    Failure Analysis on Overspeed Fracture of TiAl Alloy Turbocharger Turbine for Automotive Engines
    YANG Hu, LI Baohua
    2025, 54(23): 208-212. DOI: 10.14158/j.cnki.1001-3814.20241837
    Abstract PDF
    Email Alert RSS